Fisher CA-7000 Integrated Stereo Amplifier (Control Amplifier), 1978, made in Japan

Link: radiomuseum | hifiengine
Country: United States of America (USA)
Manufacturer / Brand: Fisher Radio; New York (NY)
Year: 1978 Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) 20: 2SA906 2SC1571 2SC536 2SD545 2SA798 2SD438 2SB560 BA301 STK0040
Reception principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 110; 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 84 W (unknown quality)
from Radiomuseum.org Model: Integrated Stereo Amplifier CA-7000 - Fisher Radio; New York NY
Material Metal case
Shape Book-shelf unit.
Dimensions (WHD) 450 x 135 x 295 mm / 17.7 x 5.3 x 11.6 inch
Notes Fisher Integrated Stereo Amplifier CA-7000.
Continuous RMS power at 8 Ohm: 2x 42W
Frequency response 120 Hz - 20 kHz: +0 dB, -2 dB
Inputs: Phono, Tape, Tuner, Aux, Mic, Tape PB.
Power Consumption: 170 W.

Semiconductors listed once per type.
Power output: 42 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 40kHz
Total harmonic distortion: 0.3%
Damping factor: 40
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 75dB (MM), 85dB (line)
Output: 150mV (line)
Dimensions: 450 x 135 x 295mm
Net weight (2.2 lb = 1 kg) 6.8 kg / 14 lb 15.6 oz (14.978 lb)

Downloads
service manual

Related Catalogues
HiFi

A&R Cambridge A60 (Arcam) Integrated Amplifier, 1976, made in England



The Arcam A60 Amplifier delivers unsurpassed sound quality and performs with its legendary reliability. It is presented in a highly attractive but appealingly restrained cabinet that will continue to please for years to come. This equipment is genuinely in a class of its own.

The A60 can accept any magnetic or moving coil cartridge. The cartridge may be optimally matched by the addition of a switchable loading module and, in the case of a low output moving coil cartridge, the internally fitted MC 60 pre-amplifier board.

All the inputs to the A60 have high overload margins so that almost any input source can be accepted without distortion. A switchable high frequency filter is fitted to reduce the noise from scratches on old records and stereo FM noise on tuners.

The bass and treble controls have been designed so that deficiencies in some small speakers and cartridges may be corrected without coloration of the mid frequency band. All input sockets have high quality silver plated contacts for minimum noise.

The loudspeakers are connected via heavy duty screw terminals which can accept either bare wires or 4mm plugs. Although the speaker sockets are wired directly to the amplifier outputs to obtain the best possible sound quality, switched outputs are also fitted enabling the speakers to be cut out when headphones are plugged in.

Tape recording outputs are provided from both auxiliary and tape sockets, matching the inputs of both cassette and reel-to-reel recorders. The tape button allows source / tape monitoring of the signal when using a tape recorder with separate record and playback heads, while preset replay level controls are provided so that the A and B levels can be equalised.

A&R Cambridge T21 (Arcam) Stereo FM Tuner, 1976, made in England



Link: radiomuseum | hifiengine
Country: Great Britain (UK)
Manufacturer / Brand: A&R Cambridge Ltd. (ARCAM); Waterbeach, Cambridge
Year: 1976 ?? Category: Broadcast Receiver - or past WW2 Tuner
Semiconductors (the count is only for transistors) Semiconductors present.
Reception principle Super-Heterodyne (Super in general)
Wave bands FM Radio only (very seldom UHF only).
Details
Power type and voltage Alternating Current supply (AC) / 240 Volt
Loudspeaker - For headphones or amp.
Power out
Model: Stereo FM Tuner T21 - A&R Cambridge Ltd. ARCAM;
Material Wooden case
Shape Book-shelf unit.
Notes Tuner, with 5 presets.

no-name synth | organ



Eagle A7600 Stereo Amplifier, 1979, made in England | Frey 9303 | Music Hall HSV-2002 | Bayreuth Concerto HSV 9165 | Sherwood S-702CP



Since I have found from the device more than one label I wanted
it here again so that summarize other information also
find to
Three labels I've found so far
As far as I have found out there with your help are the
Equipment was all built by Hitachi

Label one is Frey, label two is Music Hall, label three is EAGLE
Label four is Hitachi who has a picture of the Hitachi, always in here so


Sold in Europe under:


more info: hifi-forum
Link: radiomuseum
Country: Great Britain (UK)
Manufacturer / Brand: Eagle International; Wembley
Year: 1979 ? Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) Semiconductors present.
Reception principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 240 Volt
Loudspeaker - This model requires external speaker(s).
Power out
Model: HiFi Verstärker A7600 - Eagle International; Wembley
Material Metal case
Shape Book-shelf unit.
Dimensions (WHD) 400 x 132 x 290 mm / 15.7 x 5.2 x 11.4 inch
Notes


  • Output Power: 2 x 100 watts into 8 ohms;
  • Inputs: Phono magnet 1 and 2
  • microphone
  • Tuner, Aux 1 Aux 2
  • Tape Aand B
  • Main Input;
  • Outputs: Speakers A and B
  • Tape A and B
  • Pre Amp Output;
  • Frequency response: 10 Hz - 40 kHz

Net weight (2.2 lb = 1 kg) 10.5 kg / 23 lb 2 oz (23.128 lb)
Price in first year of sale 458.00 DM



ITT Hifi 80 Integrated Amplifier 8045 Performance Line, 1980, made in Germany


Link: radiomuseum | hifi-studio
Country: Germany
Manufacturer / Brand: ITT Schaub-Lorenz
Year: 1980 ?? Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) Semiconductors present.
Reception principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 110; 120; 220; 240 Volt
Loudspeaker - This model requires external speaker(s).
Power out
Model: HiFi 80 Integrated Amplifier 8045 - ITT Schaub-Lorenz
Material Metal case
Shape Book-shelf unit.
Dimensions (WHD) 480 x 105 x 370 mm / 18.9 x 4.1 x 14.6 inch
Notes
  • Stereo amplifier
  • All connections in DIN and RCA
  • LED Control display
  • Inputs: Phono (magnetic and crystal), Tuner, Aux, Tape 2x. Speaker A + B
Net weight (2.2 lb = 1 kg) 13.1 kg / 28 lb 13.7 oz (28.855 lb)


Atacama Nexus Speaker Stands in Silver 600 mm, made in England


For over 25 Years Atacama has produced Award Winning speaker stands, Hifi racks and AV supports designed to enhance both visually and acoustically the equipment matched with them.

The Award Winning Nexus range of speaker stands offers excellent sonic characteristics as well as cable management as standard via one of the rear support tubes. This allows you to keep unsightly speaker cables away from view.

The stands are manufactured from heavy gauge carbon steel with high tensile fixings to maintain optimum rigidity and for improved performance Nexus come with Isolation Gel pads as standard. These pads help protect the base of your speaker, reduce the chance of slippage and create a dampening barrier to the speaker so improving sound quality.
The top plate is manufactured from 4mm thick steel plate and carpet spikes are included. All four models have identical standard top plates of 145mm wide by 180mm deep, with optional smaller top plate packs available in two sizes of 130mm wide by 200mm deep, or 130mm wide by 130mm deep. theplasmacentre

Arkas vlg 70 Speaker Stands [limited edition], made in Poland


The basics:
Limited Edition...

Cast iron, heavy base.
Steel spikes screwed into the base.
The ability to drag wires inside the tripod stand.
Front elements in 3 colors:
- Cherry
- Black
- Apple tree
Dimensions (W. D. H.): 270 x 300 x 696 mm
Platform size: 180 (depth) x 200 (width) mm
Base Size: 300 (depth) x 270 (width) mm
Load capacity: 15kg / pc.


Thorens TD 320 MK II (TP-90) + Yamaha MC-9, made in Switzerland




Technics SU-8088k Stereo Integrated Amplifier, 1979, made in Japan

 





Link: hifiengine


Specifications:
Power output: 80 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.01%
Damping factor: 50
Input sensitivity: 0.1mV (MC), 2.5mV (MM), 200mV (line)
Signal to noise ratio: 70dB (MC), 75dB (MM), 92dB (line)
Channel separation: 60dB (line)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 450 x 142 x 360mm
Weight: 15kg
Downloads:
hifiengine | elektrotanya



Palladium NSA-7000 Stereo Amplifier (#3), 1985, made in Germany | MCS (Modular Component Systems) 3847 | NEC AUA-7000E



Разработан в эпоху «золотого расцвета» с минимальным использованием интегральных схем. В системе питания используются конденсаторы с емкостью 2x10000uF что устраняет так называемый эффект «шума сети». В предусилителе используется конденсаторы Rubycon, потенциометры ALPS. Для построения выходного каскада мощности использованы 2 пары транзисторов Nec.

Построен на базе тразисторов NEC:
2 x D588 R7YD
2 x B618 R77B
Резисторы Alps (Japan)
Конденсаторы Rubycon


Link: radiomuseum
Country:  Germany
Manufacturer / Brand: Neckermann-Versand KG; Frankfurt a.M.
Brand  Twen Tone
Year: 1985 ?? Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) Semiconductors present.
Reception principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 240 W (unknown quality)
from Radiomuseum.org Model: Palladium NSA-7000 - Neckermann-Versand KG;
Material Metal case
Shape Book-shelf unit.
Notes

  • Stereo Vollverstärker mit 2x 120 Watt Musik.
  • Bass-, Treble-Control, Loudness.
  • 4 LS anschliessbar (4-16 Ohm).

Sanyo DAD M15 Compact Disk Player (Vertical CD Player) (Hitachi / Fisher Studio Standard AD M700), 1983, made in Japan




СD проигрыватель первого поколения с вертикальной загрузкой, производство Япония, 1983 год, внутри 2 DAC Philips TDA 1540D- керамика, транспорт Toshiba OPH 32 - было выпущено 3 идентичные модели - Fisher Studio Standart AD M700, Sanyo DAD M15 и Hitachi - различались они только шильдиками на передней панели. 

На борту конденсаторы Nichicon и Rubicon.
Транспортировочный болт на месте.