Telefunken RT 300 FM/AM Tuner, 1981, made in Western Germany

Service Manualelektrotanya

Device Type
Digital Synthesizer Tuner

Start of Sale

General Description
The RT 300 is the largest and most luxurious tuner of Telefunken's 1981 lineup. It offers almost all features one would have expected for a good tuner at that, with the notable exception of the timer functionality found in the RT 200, and the analog tuning wheel found in the TT 750. It can however still be regarded as a direct successor of the TT 750, since the digital tuning system is almost the same, built around three chips custom-made for Telefunken.

The RT 300 was part of Telefunken's T 300 high-end component system, and it has a remote control input that allows the drive functions to be controlled via the RP 300 pre-amplifier.


FM/MW/LW, 40 program memory places, manual/automatic tuning, digital frequency input, LED field strength indicator, exact tuning indicator, fluorescent display, automatic muting via RP 300

FM antenna (both dipole and coaxial), AM antenna, AF out(DIN and Cinch), Remote Control

Rotel RA-913 Stereo Integrated Amplifier, made in Japan

Power output: 60 watts per channel into 8Ω (stereo)
Frequency response: 8Hz to 40kHz
Total harmonic distortion: 0.3%
Damping factor: 50
Input sensitivity: 2mV (MM), 150mV (DIN), 150mV (line)
Signal to noise ratio: 75dB (MM), 95dB (line)
Output: 330mV (line), 100mV (DIN), 0.8V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Dimensions: 480 x 150 x 375mm
Weight: 11.5kg

Marantz PM5004 Integrated Amplifier, made in China

    Main In/Pre Out- / -
    Bridge Mono Mode/Bi-Amp Mode- / -
    Headphone Out1
    Phono InputMM
    Analog L&R In5
    Analog L&R Out2

Kawai GB-1 Session Trainer Vintage Drum Machine, made in Japan

T+A PP 120, made in Germany

Hersteller: T + A
Modell: PP 120
Baujahre: 1985 - 1986
Hergestellt in: Deutschland
Farbe: Schwarz
Abmessungen: 260 x 450 x 230 mm (B x H x T)
Gewicht: ca. 14,2 kg
Technische Daten
Bauart: 3-Wege Baßreflex Kompaktlautsprecher
Hochton: Kalotte
Belastbarkeit (Nenn-/Musikb.): 80/120 Watt
Frequenzgang: 30 - 25.000 Hz

Impedanz: 4 Ohm

Sharp Optonica SM-1616, made in Japan

Specifications: hifiengine
Power output: 32 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 60kHz
Total harmonic distortion: 0.2%
Damping factor: 40
Input sensitivity: 2.5mV (MM), 150mV (line)
Output: 150mV (line), 30mV (DIN)
Semiconductors: 2 x IC, 24 x transistors, 2 x FET, 17 x diodes
Dimensions: 442 x 144 x 253mm
Weight: 7.8kg

service manual

Defil Lap Steel Guitar, 1970s, made in RPL - Polska Rzeczpospolita Ludowa

Universum System Hifi 7500 SL (V 2315A), 1981, made in Germany

Dieser Verstarker (V 2315) ist Bestandteil des Universum Systems Hifi 7500 SL. Zusatzlich angeboten wurden im abgestimmten Design ein Тюнер, ein Plattenspieler sowie Tape Decks in unterschielichen Varianten.
Der Verstarker wurde damals in zwei unterschiedlichen Varianten hergestellt. Die erste Version verfugte uber eine Raumklang-Einrichtung, mit Hilfe derer ein sogenannter "4D-Quadro Raumklang" erzeugt werden konnte. Neben der ublichen Stereo-Акустическая система wurden hierfur zwei ruckwartige Effektlautsprecher benotigt.
Eine spatere Version dieses Verstarkers hatte diese Raumklangfunktion nicht mehr, statt dessen wurde eine "Mute-Funktion" in das Gerat implementiert.
Besondere Kennzeichen dieses Gerates waren seine flussigkeitsgekuhlte Endstufe(Heat-Pipe), eine massive Front aus Aluminium, sowie ein vergleichsweise flaches Gehausedesign. Vermutlich steht in diesem Zusammenhang der Namenszusatz "SL", der in der damaligen Werbung zu dieser Serie als "Slim-Line" bezeichnet wurde.

Linn LK100 Power Amp, 1996, made in Scotland

The Linn LK100 Power Amplifier is a flexible power amplifier with performance and power to drive virtually any loudspeaker. It can be used with the Linn Kairn in a main system and is ideal for use in distributed sound systems.
Multiple outputs allow easy bi- and tri- wiring, and the affordability of the LK100 makes bi- and tri- amplification of loudspeakers more accessible.
The LK100 has over current and over temperature protection, an efficient internal heatsink, and is stable into any load. Additionally surface-mounted transistors on the circuit board provide efficient heat dissipation.
With output power of 50 watts per channel into 8 ohms, or 90 watts per channel into 4 ohms, the LK100 has the ability to drive the most demanding loudspeakers. Its elegant looks make it ideal for stacking in multi-amplifier and active systems.
Good looks combined with affordability make the LK100 a highly desirable amplifier, and its high performance gives it a wide range of applications, including driving Linn Kabers, or the active Keltik loudspeaker system. 



Width - 320mm Depth - 326mm Height - 80mm
Weight - 7kg
Sensitivities for 20 V rms output (50 Watts per 8 ohms) at 1 Hz
Input: 741mV rms / 4.7Kohms
Maximum power: 50 Watts/8 ohms per channel
80 Watts/4 ohms per channel
Mains Supply/Fuse
115V and 100V 6.3A
240V and 220V 3.15A
Power Consumption
300VA maximum, 15W idling

Owner's Manual:

Trio Stereophonic W-10 Stereo Pre/Main Amp Am/Fm/Sw, made in Japan

диапазон FM от 76 до 96Мгц.
Выходная мощность 5Вт.
Однотактный (класс "А").
Выходная лампа 6BQ5 (она же EL84, 6П14П).
Кенотронный блок питания.
Бумагомаслянные межкаскадные конденсаторы.
Питание 100/117В (В комплекте понижающий трансформатор 500ВА 220/100/117В на фото есть).
Оригинальный дизайн без перекрасок корпуса.
Заменены 2 электролита и 2 лампы оригинальные заменены на аналоги 6П14П (все оригинальные запчасти прилагаются, лампы оригинальные рабочие) + в комплекте отдаю еще одну лампу новую 6П14П.

Leak Stereo 30, made in England

Link: hifiengine
Power output: 15 watts per channel into 4Ω (stereo)
Total harmonic distortion: 0.1%
Damping factor: 60
Input sensitivity: 3mV (mic), 3.5mV (MM), 125mV (DIN), 30mV (line)
Signal to noise ratio: 52dB (MM), 66dB (line)
Speaker load impedance: 4Ω to 15Ω

Dual CV 1260 CLASS A, 1985, made in Japan

Model: CV 1260
Years of construction: around 1985
Manufactured in: Japan (Denon)
Colour: satin metallic and anthracite metallic
Type: Analog
Remote Control: No
Power consumption: Idle 44 VA, Power Rating 500 VA, max. 680 VA
Dimensions: 440 x 97 x 265 mm (WxHxD)
Weight: 7 kg
Factory price approx .: 700 DM

Number of inputs: 5
  • Phono (RCA), 2.5 mV / 47 kOhm (MM), 0.8 mV / 100 kilohms (MC)
  • Tuner (RCA), 200 mV / 47 kOhm
  • Tape1 (DIN), 200 mV / 47 kOhm
  • Tape2 (RCA), 200 mV / 47 kOhm
  • Monitor (RCA), 200 mV / 22 kOhm

Number of outputs:

  • 2x speakers (8-16 ohms)
  • 2x Rec Out Tape1 (DIN) / Tape2 (RCA) (Ri 470 Ohm)
  • Headphones 6,3mm

Technical specifications
Power Output

  • 8 ohm: 2x 50 watts
  • Music performance
  • 8 ohm: 2x 80 watts

Total harmonic distortion (up to 2 x 70 W, 1 kHz): 0.02%
Damping factor: > 70
Frequency response: 10-45000 Hz
Signal to noise ratio: 88 dB (line inputs), 68 dB (Phono MM), 61 dB (Phono MC)
Stereo channel separation:

  • between the channels: 55 dB
  • between the inputs: 70 dB

Tone control:

  • Bass and chief regulator
  • Loudness: switchable
  • High Filter: No
  • Low filter (subsonic): Yes
  • Mute: No
  • Direct / Line-Straight: No

Special Features
Record Selector via pushbuttons
Monitor output via pushbutton
two combined VU / watt meter illuminated,
Class A amplifiers

Tangent Hi-Fi CDP-100 CD Player, Made in Denmark

Compatible disc types CDA, MP3
Output voltage 0.7V+/-2dB
Frequency characteristics (Reference: 1kHz 0dB)
  • 20 Hz 0dB / -0.5 dB +/- 1 dB
  • 100 Hz 0dB / 0 dB +/- 1 dB
  • 10 kHz 0dB / -0.5 dB +/- 2 dB
  • 20 kHz 0dB / -3.0 dB +/- 2 dB
Channel balance < 2.0 dB
Separation > 60 dB
Harmonious distortion (T H D + noise) < 0.05%
Signal/noise ratio > 90 dB
Voltage and power consumption See the rear panel
Dimensions (WxDxH) 430 x 290 x 60 mm