Canton LE-350 (Black), 1974, Made in Federal Republic of Germany

 

Link: radiomuseum

Country:  Germany
Manufacturer / Brand:  Canton, Weilrod
Year: 1974 Type: Loudspeaker, headphone or earphone
Wave bands - without
Details 
Power type and voltage No Power needed
Loudspeaker 2 Loudspeakers
Power out
Model: LE350 - Canton, Weilrod
Material Wooden case
Shape Miscellaneous shapes - described under notes.
Dimensions (WHD) 360 x 205 x 190 mm / 14.2 x 8.1 x 7.5 inch
Notes
  • 2-way hi-fi speaker with 35 watts RMS.
  • 4-8 ohms impedance.
  • Frequency response 40-25000 Hz Crossover (slope 10/14 dB): transition at 1400Hz.
  • Volume: 12.6 liter Gross.
Finish: natural walnut or polyester coating in white or anthracite. Run Gelochtes Alloy grid. High or provide cross. Suspension. 5-meter connection cable with standard plug firmly mounted.

Net weight (2.2 lb = 1 kg) 5.7 kg / 12 lb 8.9 oz (12.555 lb) 
Source of data -- Original prospect or advert


Arcus TS 300, made in Germany


Link: hifi-wiki

General

  • Manufacturer: Arcus
  • Model: TS 300
  • Years of construction:
  • Made in:
  • Color: black, walnut
  • Dimensions: 250 x 390 x 250 mm (W x H x D)
  • Weight: 9 kg
  • New price approx .: 800 DM / pair


Technical specifications

  • Design: 3-way phase reversal, compact speaker
  • Chassis:
    • Woofer: 1x 190 mm
    • Midrange: 1x 110 mm
    • Tweeter: 1x 25 mm dome
  • Load capacity: (continuous / music) 60/100 watts
  • Efficiency:
  • Frequency response: 40 - 25,000 Hz
  • Transition ranges: 600/3000 Hz
  • Impedance: 4 ohms



Monacor SA-800 Solid State Stereo Amplifier, 1973-1977, made in Japan




Оконечный усилитель собран на: 4 x Toshiba 2SC793

Country:  Germany
Manufacturer / Brand:  Monacor, Bremen
Year: 1973–1977
Category: Audio Amplifier or -mixer

Main principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 110; 117; 220; 240 Volt

Loudspeaker - This model requires external speaker(s).
Power out 120 W (undistorted)
Model: Solid State Stereo Amplifier SA-800 - Monacor, Bremen
Material Metal case
Shape Book-shelf unit.
Dimensions (WHD) 410 x 135 x 300 mm / 16.1 x 5.3 x 11.8 inch
Notes

  • Anschlüsse: 2× Aux, Tuner, 2× Phono, Tape, Pre out, Main in, Mono out. Betrieb von 4 LS. Metallgehäuse mit seitlichen Holzblenden.
  • Made in Japan.
  • Musikleistung 2x 90W, Dauerleistung sinus: 2x 60W / 4Ω, 2x 50W / 8Ω
  • Klirrfaktor <0,4%, Frequenzbereich: 10 Hz - 50 kHz
  • Frequency response: 5Hz to 70kHz
  • Total harmonic distortion: 0.4%
  • Input sensitivity: 2.2mV (mic), 2.5mV (MM), 150mV (line)
  • Signal to noise ratio: 65dB (mic), 65dB (MM), 75dB (line)
  • Output: 150mV (line)
Neupreis 1977 im RIM-electronic Katalog: 560 DM

Net weight (2.2 lb = 1 kg) 10 kg / 22 lb 0.4 oz (22.026 lb)
Price in first year of sale 489.00 DM
Source of data Radiokatalog Band 2, Ernst Erb


PRO TRONIC RS-1515 Solid State Stereo Amplifier [Monacor SA clone], 1975, made in Japan / Germany


Оконечный усилитель собран на: 2 x SK A768 & SK C1826

Country: Germany
Manufacturer / Brand: SB ELEKTRONIK, Protronic (Marke / brand); Mannheim
Year: 1975 ??
Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) 16:
Main principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 30 W (unknown quality)
Model: RS-1515 - SB ELEKTRONIK, Protronic Marke
Material Various materials
Shape Book-shelf unit.
Dimensions (WHD) 280 x 100 x 170 mm / 11 x 3.9 x 6.7 inch
Net weight (2.2 lb = 1 kg) 2.4 kg / 5 lb 4.6 oz (5.286 lb)

Dual CL9, 1967-1970, made in Germany


Link: radiomuseum

Country: Germany
Manufacturer / Brand: Dual, Gebr. Steidinger; St. Georgen/Schwarzwald
Year: 1967–1970
Category: Loudspeaker, headphone or earphone
Wave bands - without
Details
Power type and voltage No Power needed
Loudspeaker Permanent Magnet Dynamic (PDyn) Loudspeaker (moving coil)
Power out 10 W (max.)
Model: CL9 - Dual, Gebr. Steidinger; St.
Material Wooden case
Shape Book-shelf unit.
Dimensions (WHD) 230 x 363 x 162 mm / 9.1 x 14.3 x 6.4 inch
Notes
  • Dual CL9 Lautsprecherbox
  • Lautsprecherbox mit 10 Watt Musikbelastbarkeit, 60-18000 Hz, Bestückung 1 Spezial-Breitband-Duo-Chassis 200 mm (Wigo, tatsächlich 195 mm), Schwingspule 25 mm, Luftspaltinduktion 12000 Gauss.
  • Frühe Version in dunklerem Nußbaum mit dunklerer Frontbespannung, spätere Version helleres Nußbaum mit hellerer Bespannung.
  • Angegebene Impedanz, frühe Version 5 Ω, späte Version 4 Ω (die Lautsprecherchassis sind immer mit 5 Ω gestempelt).
Net weight (2.2 lb = 1 kg) 4 kg / 8 lb 13 oz (8.811 lb)
Price in first year of sale 98.00 DM
Source of data -- Original prospect or advert
Mentioned in Dual Kataloge 1967 bis 1970, Preisliste 1967




Onkyo Integra A-8250 Integrated Stereo Amplifier, 1985-1987, made in Japan


Link: hifiengine

Оконечный усилитель собран на: 2 x Toshiba 2SA1301 & 2SC3280

Specifications
Power output: 70 watts per channel into 8Ω (stereo)
Frequency response: 2Hz to 50kHz
Total harmonic distortion: 0.018%
Damping factor: 50
Input sensitivity: 0.16mV (MC), 2.5mV (MM), 150mV (line)
Signal to noise ratio: 70dB (MC), 80dB (MM), 84dB (line)
Output: 150mV (line)
Semiconductors: 4 x IC, 38 x transistors, 43 x diodes
Dimensions: 435 x 144 x 391mm
Weight: 10.5kg

Downloads
schematics

Related Catalogues
High Fidelity


Rank Arena HT-17, 1967-1970, made in Denmark


Link: vintage-radio | faktiskt - Martin Persson

  • bass: Peerless 5x7in U570
  • tweeter: Peerless MT25HFC (size- approx.  2.5" sq. x 1.5"d / resistance (meter) -  4-4.2 ohm / resistance (rated)-  4 ohm)
One peculiar detail about the bass, is that it could be delivered with a lower resonance frequency (65Hz as opposed to 90Hz) for use in small closed boxes.
The box is completely full with Rockwool damping material and a sheet of cloth protects the drivers.

16uF and a coil as crossover.

Dimensions: 32x25x12 cm
Impedance: 4 ohms
Years of construction: 1967 - 1970
Made in: Horsens, Denmark



Fera / RFT (Fernseh-Radio) Tuner 50 [Comix T430], 1976, made in Germany


Link: radiomuseum | Comix T430

Country: Germany
Manufacturer / Brand: Fernseh-Radio Berlin (FERA), PGH; (Ostd)
Year: 1976
Category: Broadcast Receiver - or past WW2 Tuner
Semiconductors (the count is only for transistors) 14:
schematic requested
Main principle Superheterodyne (common); ZF/IF 455/10700 kHz
Tuned circuits 7 AM circuit(s) 14 FM circuit(s)
Wave bands Broadcast, Long Wave, Short Wave plus FM or UHF.
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - For headphones or amp.
Power out
Model: HiFi Tuner 50 - Fernseh-Radio Berlin FERA, PGH
Material Wooden case
Shape Book-shelf unit.
Dimensions (WHD) 430 x 95 x 250 mm / 16.9 x 3.7 x 9.8 inch
Notes
  • Wurde einzeln verkauft und in Kombination mit dem Verstärker Stereo-HiFi50.
  • Diesen gab es auch als empfohlene Kombination mit dem Plattenpieler HiFi-Sonate (ehem. Kurt Ehrlich, Pirna).
  • Siehe auch die Exportversion Comix T430.
Price in first year of sale 620.00 Mark
Mentioned in Sortimentskatalog Elektroakustik (DDR, 1976)





Fera / RFT (Fernseh-Radio) Stereo HiFi 50, 1972-1974, made in Germany


Данный экземпляр НЕ Quadro.


Усилитель был взят за основу для построения Fera V150 в 1982 году. radiomuseum rft-hifigeraete

Оконечный усилитель собран на: 4 x Tesla KU607.

ЛЮТЫЙ BASS КАЧ ПОД: digitalhardcore / cyberpunk / hip hop.

Доукомплектовывался стерео-тюнером этой серии Fera HiFi Tuner 50

Country:  Germany
Year: 1972–1974 Category: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) 26:
Main principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 50 W (70 W max.)
Model: Stereo-HiFi 50 - Fernseh-Radio Berlin FERA, PGH
Material Wooden case
Shape Book-shelf unit.
Dimensions (WHD) 430 x 95 x 255 mm / 16.9 x 3.7 x 10 inch
Notes 
  • Transistorisierter Stereoverstärker mit eisenlosen Endstufen und Kurzschlusssicherung.
  • Ausgangsleistung: Sinus 2x 25 W, Musik 2x 35 W.
  • Übertragungsbereich: 40...20.000 Hz.
  • Eingänge für Mikrofon, Rundfunk, Tonband, Phono 1 (3,5 mV) und Phono 2 (180 mV); Ausgänge: Tonband 30 mV, 2x Lautsprecheranschluss 4...12 Ω.
  • Klirrfaktor: ≤ 0,5 %; Gehäuse: Edelholz.
Net weight (2.2 lb = 1 kg) 6.8 kg / 14 lb 15.6 oz (14.978 lb)
Price in first year of sale 885.00 Mark
Collectors' prices  
Source of data -- Original-techn. papers.
Mentioned in Sortimentskatalog Elektroakustik (DDR, 1976)

The amplifier 50 HiFi Quadro effect of PGH TV-Radio Berlin is the successor of the famous HiFi 50. He is the first hi-DDR-home amplifier having the connection for two additional speakers to pseudoquadrofonen playback. This process should not be a substitute for real quadraphony, but is intended as an improvement of the stereo reproduction that significantly improve the three-dimensional sound image despite the low technological effort. The electrical and mechanical properties would otherwise remain virtually unchanged compared to the HiFi 50, so the description largely done with the text. ifatwww.et.uni-magdeburg


The amplifier has on the rear side of the tape 5 inputs, phono, tuner, micro and specialty, the latter is mainly intended for the connection of electronic musical instruments that can be selected via a push-button set. The signals of the five inputs, which have a total of 3 different sensitivities are input, coupled to the base of the three-stage input amplifier via various passive RC networks. This is equipped with low noise Miniplast transistors, thermally very stable and due to strong negative feedback relatively insensitive to transistor manufacturing tolerances. An equalizer amplifier for magnetic sensing systems for the phono input is not provided in HiFi Quadro 50 effect.

The preamplifier is in two stages and also equipped with low-noise transistors. It allows dual potentiometer on the control for bass, treble, balance and volume, the latter is affected aurally. A rumble filter and the Mono button is still available, the existing the old model noise filter has been replaced by the contour button, which should provide at low volume for a more brilliant sound.

The power amplifier, a four-stage electrically coupled network is set up discretely, fully equipped with silicon transistors and operates as a quasi-complementary output stage in Darlington circuit. It is powered by unbalanced supply voltage and thus requires Auskoppelelkos. In a speaker protection circuit, and a delay was waived. Only an overdrive protection circuitry has been provided which abtennen briefly about each one relay the speakers at excessive level peaks.

The HiFi 50 provides connections for 2 speakers and a stereo headphone, said the non-switchable socket is located on the rear panel. He also has a red lamp as network control, and red clip indicators for both channels, in addition a green stereo display is now available.

The optical design of the HiFi 50 is simple and technically in a modern, slim case made of wood. The front panel is made of black painted aluminum and is labeled with a white screen printing in German. The round keys are made of black plastic with chrome cap, the knobs are made of chromed plastic.

Another variant has a two-part front with black frame and silver aluminum front panel. The keys are square and made of black plastic, as well as the knobs.

The HiFi 50 Quadro effect was presented at the Leipzig Autumn Fair 1974, the first time the public.