Behringer RX1602 V1 Eurorack Professional Multi-Purpose 16-Input Ultra-Low Noise Line Mixer, 2005, made in China

Link: behringer | soundonsound | Owner's Manual

Audio Inputs
Type: 1/4" TRS connector, electronically balanced
Impedance: 10 kΩ balanced or unbalanced
Gain range: -∞ to +15 dB
Operating level: +4 dBu/-10 dBV (switchable)
Maximum input level: +22 dBu
CMRR @ 1 kHz: Typically > 50 dB

Audio Outputs
Main Out L/R
Type: 1/4" TRS connector, impedance balanced
Gain range: -∞ to +15 dB
Impedance: 240 Ω balanced, 120 Ω unbalanced
Maximum output level: +22 dBu
Mon Out
Type: 1/4" TRS connector, impedance balanced, mono
Impedance: 240 Ω balanced, 120 Ω unbalanced
Max. output level: +22 dBu
Phones Output
Type: 1/4" TRS connector, stereo
Minimum load impedance: 100 Ω

System Specifications
Bandwidth: 20 Hz - 20 kHz ±0.2 dB
Frequency range: 10 Hz - 200 kHz, ±3 dB
Signal-to-noise ratio: < -97 dB
THD: 0.003% @ +4 dBu, 1 kHz, unity gain
Crosstalk: < -70 dB

Power Supply
Switch-mode autorange power supply: 100-240 V ~50/60 Hz
Power consumption: 15 W
Mains connection: Standard IEC connector

Physical
Dimensions (H x W x D): 44 x 483 x 149 mm (1.7 x 19.0 x 5.9")
Weight: 1.8 kg (4.0 lbs)

Behringer Modulizer PRO DSP1200P Digital 24-BIT multi-effects processor rev, 1.0A, 1998-1999, made in China

Link: Owner's Manual | Reviews

Cutting-edge effects such as 3D Processor, Stereo Imager, Lo-Fi, Super Bass, Ring Modulator, Voice Canceler, etc.
24 breathtaking effects such as Ultra Phaser, Harmonic Exciter, Auto Filter, Jetstream Flanger, Ultra Compressor, Guitar Combo, Speaker Emulation, Resonator and more
Hundreds of effect variations plus two individual parameters and separate low and high EQ section
True stereo processing performance allows separation of left and right channels in the stereo field for open-sounding enhancement of the sound sources
Free MODULIZER software allows for total remote control via PC (download at www.behringer.com)
20-bit A/D and D/A converters with 64/128 times oversampling for ultra-high headroom and resolution
Internal 24-bit processing with professional 46 kHz sampling rate
Servo-balanced inputs and outputs on gold-plated XLR and TRS jack connectors for high signal integrity
100 user preset memories to store programs for instant recall
Accurate 8-segment LED level meter simplifies level setting for optimum performance
“Future-proof” software-upgradeable architecture
Full MIDI capability allows real-time parameter control and program selection
Internal power supply design for professional application
High-quality components and exceptionally rugged construction ensure long life

Behringer V-verb PRO REV2496 rev. 1.2 Ultra High-Performance 24-Bit/96 kHz Dual-Engine Reverb Modeler, 2003, made in China

Link: behringer | soundonsound | Owner's Manual [ver 1.0]

The BEHRINGER V-VERB PRO REV2496 is a reference-class reverb modeler that simulates some of the world’s most renowned reverb processors. It draws its strength from two independent effects processors that can be accessed via both analog and digital connectors. It also features 8 high-end reverb algorithms modeled after world-class reverb processors, plus additional high-quality modulation effects from X-Over Delay to Chorus/Flanger, as well as a stereo Compressor.

Thanks to its high-quality 24-bit/96 kHz A/D and D/A converters plus full 96 kHz operation of both effects processors (all 4 channels!), the REV2496 guarantees absolute high-end performance.

There are 10 different routing configurations for flexible assignment of analog and digital signals to both stereo engines. A full-featured digital interface with AES/EBU In/Out, optical S/PDIF In/Out, Wordclock In and MIDI capability allow flexible integration with other digital equipment. An ultra high-resolution SHARC® processor with 32-bit internal signal processing, ensures the ultimate in sonic resolution.

In spite of all these impressive features and state-of-the-art performance, the REV2496 is intuitive and easy to use, with its soft push/turn encoders, big preset wheel, high-resolution LCD display, plus its TAP button for manually entering delay times. Direct access to 4 effect parameters makes editing easy and comfortable, and you can edit up to 30 parameters using our specially designed graphic mode. Separate ROM and user preset banks put a total of 400 presets at your fingertips—and open architecture allows future software updates via MIDI. Of course, you also get balanced inputs and servo-balanced outputs with gold-plated XLR and ¼" TRS connectors.

Specifications:

ANALOG INPUTS
Type:
- XLR balanced
- 1/4" TRS stereo balanced
Impedance Max. input level: +16 dBu
CMRR: typ. 40 dB


ANALOG OUTPUTS
Type:
- XLR, servo-balanced
- 1/4" TRS stereo servo-balanced
Impedance: approx. 100 Ω balanced
Max. output level: +16 dBu

SYSTEM SPECIFICATIONS
Frequency range:
- <10 Hz - 20 kHz @ 44.1 kHz
- <10 Hz - 22 kHz @ 48 kHz
- <10 Hz - 46 kHz @ 96 kHz
Signal-to-noise ratio: -90 dBu
Dynamic range: 106 dB (analog in ß analog out)
THD: 0,007% typ. @ +4dBu, 1 kHz, Gain 1
Crosstalk: < -100 dB (analog in ß analog out)
Signal delay: < 1 ms (analog in ß analog out)

DIGITAL INPUT 1
Type: XLR servo-balanced
Standard: AES/EBU or S/PDIF
input impedance: 110 Ω
nominal input level: 0.2 - 5 V peak-to-peak

DIGITAL INPUT 2
Type: TOSLINK optical
Standard: AES/EBU or S/PDIF

DIGITAL OUTPUT 1
Type: XLR servo-balanced
Standard: AES/EBU or S/PDIF

DIGITAL OUTPUT 2
Type: TOSLINK optical
Standard: AES/EBU or S/PDIF

SYNC INPUT
Type: BNC
Standard: Wordclock (1 x sample rate)
input impedance: approx. 50 kΩ
Nom. level: 2 - 6 V peak-to-peak

MIDI Interface
Type: 5-pin DIN jacks In/Out/Thru

Implementation: cf. MIDI implementation chart

DIGITAL PROCESSING
Processor: high-resolution SHARC® DSP 600 MFLOPs, 32-bit internal signal processing
Converter: 24 Bit/96 kHz
Sample rate: external, 44.1 kHz, 48 kHz, 96 kHz

DISPLAY
Type: 128 x 64 backlit liquid crystal display (green) with adjustable contrast

MEMORY
Presets:
- 100 ROM + 100 user presets for engines A and B
- 100 ROM + 100 user presets for combinations

POWER SUPPLY
Mains voltage: 85-250 V~, 50-60 Hz
Power consumption: 10 W typ.
Fuse: T1AH
Mains connector: Standard receptacle

DIMENSIONS/WEIGHT
Dimensions: 19" (482,6 mm) x 1 3⁄4" (44,5 mm) x 8 1⁄2" (217 mm)
Weight: approx. 4 3⁄4" lbs. (2.15 kg)

Behringer Tube Ultragain MIC200 Vacuum Tube 12AX7 Preamplifier with Preamp Modeling Technology, 2003, made in China

Link: behringer | Owner's Manual [PDF, en]

The TUBE ULTRAGAIN MIC200 from Behringer is a single channel, low voltage plate tube based microphone/instrument preamplifier, housed in a compact, desktop enclosure. With switchable phantom power available, the unit will work with all types of microphones. Additionally, the preamp features a 20dB pad, phase reverse switch, low-cut filter and balanced inputs and outputs. When used as a high-end DI-box, the preamp provides outstanding signal integrity.

The preamp has 2 interesting features, the first being the inclusion of flexible preamp modeling. This allows the user to optimize recordings by selecting one of the 16 preamp settings that matches their needs, be it for vocals, or acoustic and electric guitars, bass guitars, keyboards, drums and more. The second is an integrated limiter that prevents distortion on the output of the MIC200. Various fixed limiter settings are available within some of the 16 preamp models.

• Tube based preamp for all microphone, instrument and line-level sources
• Perfectly matches a studio or live hard disk recording set-up
• Preamp modeling with 16 presets designed for electric and acoustic guitars, keyboards, bass guitars, drums, vocals and more that allows for quick setup
• Hand-selected 12AX7 vacuum tube
• Provides optimum signal transparency when used as a DI box
• Built-in output limiter that prevents the output signal from being distorted
• Low-cut filter eliminates unwanted noise
• Dedicated switches for +48 V phantom power, phase reverse and a 20dB pad
• Highly accurate 8-segment LED level meter
• Balanced inputs and outputs

Behringer V-Tone Driver GDI21 Guitar Amp Modeler/Direct Recording Preamp/DI Box, 2009, made in China

Link: behringer  | Owner's Manual

• Analog guitar modeling preamp/stompbox with DI recording output
• This BEHRINGER product has been designed to compete head to head with leading products on the market
• Authentic V-TONE modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations. Easily achieve the most sought-after tube amp sounds from clean, crunch to super-fat distortion
• Provides a truckload of great amps in a single stomp box - simply choose your favourite sounds with a flick of a switch
• Precise level and drive control plus musical 2-band EQ for ultimate sound
• Dual DI mode for either direct recording output with speaker simulation or standard active direct injection box in bypass mode
• Output available on1/4'' TS or balanced, gold-plated XLR connectors
• Ground lift switch eliminates typical ground loop problems
• Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Our authentic V-TONE modeling technology recreates three of the most sought-after classic guitar amps, with three gain modes and three mic placements for a total of 27 possible configurations. You get a truckload of great amps in one convenient stomp box, allowing you to go from clean or crunch to super-fat distortion in a flash.

Behringer EQ700 Graphic Equalizer Pedal, 2005, made in China

Link: behringer

Now you can use seven EQ tapes to refine your sound and remove feedback! This pedal is convincing with a frequency response of 100 Hz to 6.4 kHz and a generous 15 dB boost / cut. A status LED for effect activation and battery check is included. An electronic on / off switch ensures quiet switching. The power supply is via a 9-volt battery or a DC adapter (not included).

• Floor / foot pedal
• 7 EQ tapes to refine your sound and remove feedback
• Wide frequency response from 100 Hz to 6.4 kHz with generous 15 dB boost / cut
• Status LED for effect activation and battery check
• Operation via 9-volt battery or Behringer PSU-SB DC power adapter (not included)
• Electronic on / off switch for silent switching

Behringer Digital Piano EUROGRAND EG2180-BK 88-Key Hammer Action

Link: musictri | ebay | media.music-group

88 Full-Size Hammer-Action Keys
Classic Piano Look
Built-In Stereo Speakers
14 Instrument Voices
2-Track Recorder
Digital Effects
3 Traditional Pedals
MIDI In/Out/Thru Connectors
Stereo Line-Level I/O
Dual Headphone Jacks

Основные параметры
Тип инструмента	цифровое пианино
Обучение	нет
Клавиатура
Количество клавиш	88
Жесткость клавиатуры	взвешенная
Молоточковая механика	есть
Размер клавиш	полноразмерные
Чувствительность клавиатуры к касанию	есть
Разделение клавиатуры	есть
Звуковые контроллеры
Педали	встроенные
Правая (damper) педаль	в комплекте
Левая (una corda) педаль	в комплекте
Средняя (sostenuto) педаль	в комплекте
Конструкция
Корпус	классический
Крышка клавиатуры	есть
Встроенная акустическая система	есть
Мощность встроенного усилителя	2x40 Вт
Дисплей	есть
Размеры (ШxВxГ)	1405x880x525 мм
Вес	64.6 кг
Функции
Количество тембров	14
Полифония	64
Автоаккомпанемент	нет
Транспонирование	есть
Количество эффектов	8
Реверберация	есть
Количество записываемых песен	1, до 2 треков в каждой
Разъемы и интерфейсы
Количество выходов на наушники	2
Количество линейных выходов	2
Линейный вход	есть
Разъемы MIDI	вход и выход
Интерфейс USB type B	нет

SoundKing skat 500 (Behringer T1952 Tube Composer)

Технические характеристики Soundking SKAT 500:
Инструментальный предусилитель/компрессор
Ламповый предусилитель
Моно/стерео
DSP процессор с 15 алгоритмами
Регулировки порога, атаки, компрессии, отпускания
Ламповая секция предусиления, лампы 12AX7,
Стрелочные индикаторы уровней,
Выбор типа компресси: soft/hard knee,
Встроенный экспандер/гейт, пиковый лимитер,
Частотный диапазон: 10Гц - 20кГц,
Коэффициент гармоник :0,5%
Размеры: 19" 2U

Behringer V-VERB PRO REV2496

 

Behringer B-Control Audio BCA 2000

The BCA2000 is a high-speed USB 2.0 multi-channel audio MIDI interface that raises your performance to a whole new level. It features a high-performance analog input section that has 2 state-of-the-art studio-grade IMP 'Invisible' Mic Preamps with +48 V phantom power, plus line and Hi-Z guitar inputs. Combine this with its versatile digital input and output formats like ADAT, ADAT S/MUX, AES/EBU and S/PDIF (including Dolby Digital and DTS options) and you have an unlimited array of interfacing capabilities.

You can simultaneously use 3 analog input sources (1 mono + 1 stereo) with digital input sources. Its ultra-flexible input/output configuration is supported by a comprehensive LED audio routing indicator plus button (status) LEDs. Input signal distortion and A/D converter overload are prevented by the adjustable studio-grade analog input dynamic control (noise gate + limiter).

The BCA2000's fully equipped USB/MIDI interface with 1 MIDI input and 2 MIDI outputs is individually selectable for 16/32 MIDI channels. Plus, full multi-channel playback is enabled at 24-bit/96 kHz. There is a high-resolution 2 x 12 element LED level indicator for stereo In/Out signals plus 2-element LED level indicator for input and output channels 3 through 8. The high-speed USB 2.0 interface with 24-bit/96 kHz supports 8 In & 8 Out channels simultaneously (analog and digital) with low-latency ASIO 2 and WDM drivers.

Simply connect your B-Control to your computer via high-speed USB 2.0. Then connect your keyboard, guitar and mic. True audiophiles will surely appreciate the fully equipped master and monitor sections with 100-mm fader, individual level controls for 2 speakers, 2 phones and low-latency direct monitor function plus separate dim, mute and mono functions. Best of all, discover just how awesome MIDI can be!

Behringer GMX1200H V-Tone

Product Features: http://www.behringer.com

• Powerful 2 x 60-Watt guitar workstation with authentic V-TONE Analog Modeling
• 2 Loudspeaker outputs for true stereo operation
• Authentic V-TONE Analog Modeling for 3 classic guitar amps, 3 speaker simulation models plus 3 gain modes—27 modeled sounds individually selectable per channel
• 2 independent, full-featured modeling channels offering everything you need from clean to crunch to super-fat distortion sounds
• FXT—ultra-flexible FX Tracking allows independent effects settings on each channel
• DYNAMIZER circuitry captures every nuance of your playing and lends tube-like compression to your tone
• 24-bit stereo multi-effects processor with world-class effects such as chorus, flanging, phasing, rotary, auto-wah, echo, delay, compressor and various effect combinations with 99 user presets and MIDI control
• Integrated auto-chromatic tuner controllable via footswitch
• Additional headphone output with integrated speaker simulation
• Adjustable Aux and dedicated Tape input for playback or other line-level signals (e.g. CD player, drum computer)
• Stereo Tape and Line outputs with speaker simulation for direct recording and live applications
• Insert facility for external effects devices (rack effects, stomp boxes, wah-wah pedals, etc.)
• Dual footswitch FS112 for channel selection, effect bypass and tuner activation included
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Owner's Manual [PDF, Russian Language]

Behringer PEDAL BOARD PB600

Official Web
Manual, Datasheet [PDF]