Показаны сообщения с ярлыком KRK. Показать все сообщения
Показаны сообщения с ярлыком KRK. Показать все сообщения

KRK Ergo Room Correction System v.1.3 [Enhanced Room Geometry Optimization] & FireWire Audio Interface, 2008, made in China

 

Link: soundonsound [Reviews] | ixbt | User Manual | Brochure | Windows Installer 1.51 | Mac Installer 1.51








под BigSure софт не запустится, но как DAC работает


Large Volume Knob Ultra-smooth response volume control provides simultaneous control of ERGO’s A/B/Sub outputs “A” Speakers Enables or disables the audio being sent to the “A” speakers
“B” Speakers Enables or disables the audio being sent to the “B” or subwoofer speakers.
Room Correction Turns room correction processing on or off.

KRK Rokit Powered RP10S, made in China

 

Link: prosound.ixbt | Owner's Manual

The new Rokit Powered series of close-field monitors wouldn’t be complete without a compatible low-end companion. The RP 10S sub-woofer was designed to deliver an articulate linear bass extension specifically tailored to fit the Rokit Powered monitor’s spectral balance. The RP10S features a level control, phase switch and variable filter control as well as the full compliment of input options offered on the Rokit Powered Monitors. We’ve even added a removable grill.

Features:

Frequency Response: 36Hz -50kHz +/- 1.5dB

Low Frequency Driver: 10" (254mm) High Excursion Glass Aramid Composite Woofer

Dimensions (HxWxD): 15" x 14 x 15 11/16" 38.2 cm x 35.5 cm x 39.8 cm

Weight: 42 lbs (19.1kg)

AMPLIFIER

Power Rating (HF/LF): 150 watts RMS

Signal to Noise (HF/LF): 98 dB

Input Impedance:

  • Balanced: 10K Ohm
  • Unbalanced: 10K Ohm

CROSSOVER

Filter/crossover: Fixed 80Hz High Pass Filter | Variable Low Pass Filter + Phase

Subsonic Filter: 


FUSE 5mm x 20mm:

100V - 120V 3.15A

220V - 240V 1.6A


FEATURES

XLR & 1/4" TRS

Connectors

RCA Connector

IEC Mains Connector

System Volume Control

LED Power Indicator


KRK Ergo Room Correction System [Enhanced Room Geometry Optimization] & FireWire Audio Interface, 2009, made in China


Link: soundonsound [Reviews] | ixbt | User Manual | Brochure | Windows Installer 1.51 | Mac Installer 1.51






Large Volume Knob Ultra-smooth response volume control provides simultaneous control of ERGO’s A/B/Sub outputs “A” Speakers Enables or disables the audio being sent to the “A” speakers
“B” Speakers Enables or disables the audio being sent to the “B” or subwoofer speakers.
Room Correction Turns room correction processing on or off.

Focus/Global Our 3D model allows users to preserve the “good” features of the room, while correcting the bad. ERGO also doesn’t color the sound or produce an artificial anechoic environment. Normally, ERGO corrects for your monitoring position. This gives you perfectly corrected sound while mixing. In Global mode, the corrected spot is widened so that others (producers, musicians, groupies) can enjoy your mix in a corrected environment.

Headphone Volume (side panel) Adjusts the output level of the headphone jack. The headphones have their own independent audio stream, or can mirror the A stream. Calibration Switch (back panel) this enables the room calibration microphone and places ERGO into analysis mode.

Specifications
  • Headphone output with separate level control
  • DSP Blackfin 400 MHz
  • the sampling frequency of the “RoomPerfect” algorithm is 96KHz.
  • 1024-band FIR filter for room correction
  • Weight: 610g
  • ERGO dimensions:
  • 180mm x 55mm x 107mm
  • Microphone length: 197mm
  • Firewire specification
  • Mac, WDM, ASIO driver support
  • Firewire recording interface
  • 4 inputs, 6 outputs
  • Audio specifications
  • Speaker A / B Select / Control
  • Stereo audio input
  • S / PDIF input (32 kHz-96 kHz)
  • 118 dB SNR
  • THD + N -100 dB