Lenco A-50 [Straut DXA-500 & Eurofunk EFA-8000] Stereo Integrated Amplifier, 1977, made in Switzerland

Link: radiomuseum  | elektrotanya [Service Manual] | hifiengine

Оконечный усилитель собран на: .T B558 & .T D428 (попарно в каждом канале).

Присутствует клеймо со сборкой 1977 года на внутренней стороне лицевой панели.

В комплект к усилителю выпускался Lenco T-30 Stereo Tuner, 1980, made in Switzerland

Country:  Switzerland
Manufacturer / Brand:  Lenco; Burgdorf
Year: 1977 ??

Category: Audio Amplifier or -mixer 
Semiconductors (the count is only for transistors) 43: 
Main principle Audio-Amplification 
Wave bands - without 
Details 
Power type and voltage Alternating Current supply (AC) / 100-120; 220-240 Volt 
Loudspeaker - This model requires external speaker(s). 
Power out 80 W (unknown quality) 
Model: Stereo Amplifier A50 - Lenco; Burgdorf
Material Metal case 
Shape Book-shelf unit. 
Dimensions (WHD) 430 x 142 x 372 mm / 16.9 x 5.6 x 14.6 inch 

Weight: 10.5kg

Notes

• Frequency response: 10Hz to 40kHz
• Total harmonic distortion: 0.2%
• Input sensitivity: 2.5mV (mic), 2.5mV (MM), 160mV (line)
• Signal to noise ratio: 56dB (MM), 58dB (line)
• Two speaker pairs (A + B) can be connected.
• Inputs: tuner, 2 × phono, 2 × aux, 2 × tape, microphone.
• Eingebauter regelbarer Mikrofon-Vorverstärker; schaltbare Hi- und Lo-Filter und Loudness. Besonderheiten: Tape-Copy-Funktion. Das Gerät wurde vermutlich von Seoum Electronico in (Süd-)Korea für Lenco hergestellt. Vgl. hierzu im Radiomuseum den "Stereo Amplifier SA-3180B" von Seoum.

EAG (Beag) Audio Amplifier EA-057 Mono Tube Amplifier [EL34], 1957, made in Hungary

 

Link: radiomuseum

Country: Hungary
Manufacturer / Brand: Budapesti Elektroakusztikai Gyár (BEAG), Budapest
Year: 1957

Category: Audio Amplifier or -mixer
Valves / Tubes 4: ECC83 ECC83 EL34 EL34
Main principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 20 W (unknown quality)
Model: EAG Audio Amplifier EA-057 - Budapesti Elektroakusztikai Gy
Material Metal case
Shape Tablemodel, with any shape - general.
Dimensions (WHD) 400 x 225 x 125 mm / 15.7 x 8.9 x 4.9 inch
Notes

- 20 W / 15 Ohm, 50-15000 Hz +/- 3 dB.
Net weight (2.2 lb = 1 kg) 15 kg / 33 lb 0.6 oz (33.04 lb)

AKAI EIE Interface Red 16-bit [44.1 kHz] Electromusic Interface Expander, 2011, made in China

Link: akaipro

Connection interface: USB
Manufacturer: Akai Professional
Form Factor: External

Specifications
Sampling rate: 16 bit / 44.1 kHz
Number of audio inputs: 4
Audio Inputs: 4 x XLR / TRS Combo
Number of audio outputs: 4
Audio Out Type: 4 x TRS
Phantom Power: 48V
Signal level indicators: Yes
Headphone out: 1
Mic Inputs: 4
MIDI In: 1
MIDI Out: 1

Dimensions:
Width: 330mm
Depth: 130mm
Height: 220mm
Weight: 2.73kg

Yamaha XP100T 3-Zone Tom 10" Textured Silicone Electronic Tom with Controller Knob, 2011, made in Japan

 

Link: yamaha [Owner's Manual, PDF]

Tom Tom Pad
10" DTX 3 Zone tom tom pad with controller
Pad with overwhelming feel
The face made of TCS (textured cellular silicone)
The pad is divided into three zones, so different sounds can be assigned to the zones
Impressive sound variations are possible. For example, a tom tom sound can be played in the center, a high conga sound in the open rim area and a closed conga sound in the closed rim sound.
Furthermore, the pad has a Real Controller, which can be used to control the pitch or other parameters

Specifications

Diameter: 290mm (10")

Depth: 80mm

Weight: 2.3KG

Application: Tom

Zones: 3 (Head / Open Rim / Closed Rim)

Pad surface: porous silicone

Tom mount hole: yes

Pad controller: yes

Connectors: Standard Stereo Out x1

Includes mounting screw x 1

Made in Japan