Korg Monologue BL [Blue (Dark Blue)] Monophonic Analog Synthesizer, 2017, made in China

Link: korg | wikipedia

A monophonic analog synthesizer circuit redesigned based on minilogue.
With full programmable specification, 100 programs can be stored in memory.
16 step sequencer with greatly evolved motion sequence.
Micro tuning to create unique tone.
Oscilloscope function that visually displays the waveform.
Analog battery driven analog.
Tough and stylish body made of aluminum and wood.
Sinking can be done with other groove machines by sinking. 

Caline CP-05 Power Supply, 2014, made in China

 

Link: calinemusic

Feactures:
Ten Outputs
Powers For 9V, 12V or 18V Guitar effects PEDAL
Bright Blue LED For Pedal Board Lighting & Short Circuit Indicate
Short Circuit/Over current Protected, short circuit in one channel won't affect other channels' function
When instantaneous over current occurs in this channel, the corresponding LED light would be flashing and the currents will go to its limit 7CH 9V(100mA) for ordinary analog effectors,
1CH 9V(500mA) for digital effectors and DC 9V low-power digital guitar amplifiers, 1CH 12V/18V(100mA)

Specification:
Color: Black
power: AC 110V-240V
Input: DC 18V
Output:
- 7 way 9V 100mA
- 1 way 9V 500mA
- 1 way 12V 100mA
- 1 way 18V 100mA
Dimension: 150 x 50x 30mm
Net weight: 388g

Package include:
1 x Caline CP-05 Power supply
10 x Cable
1 x User Manual

Caline CP-16 Mark 4 Distortion [emulate a Rectifier Mesa Boogie Mark IV] Guitar Effect Pedal, 2013, made in China

 

Link: tagboardeffects | schematic | effectslayouts

... also tried some different IC's, OPA 2134, OPA 2604, RC 4558P, JRC 4580, NE 5532 and LM 833. All of them sounds good with a little different in gain. The best result I got with the JRC 4558D (original) and the OPA 2604 (this sounds a little bit more HiFi).

Caline CP-20 Crazy Cacti Overdrive [Fulldrive 2 Clone] Guitar Effect Pedal, 2016, made in China

Link: calinemusic

An incredibly diverse overdrive pedal with a boat load of settings. In addition to the four Vol, Tone, Drive and Boost knobs there are also 2 switches. The first has Comp Cut, FM and Vintage modes. These provide a range of usable tones adding clean boost, crunch or remaining neutral respectively. The two way switch Mosfet and Standard create a more punchy or smooth overdrive. The boost obviously adds a boost and a touch of saturation. 

Green Ringer Clone by Mrubanoff Guitar Effect Pedal, 2018, made in Belarus

 

Link: ...

Phonic mm1705, made in China

 

Link: Owner's Manual

FEATURES:
5 balanced microphone/line input channels with insert points
Unique M/S setting for CH1+2
3 stereo (+4/-10 switchable) line input chan-nels
2 stereo line returns
2T input and recording output
1 aux and 1 effect mix send
3 band EQ for microphone/stereo line inputchannels
PFL feature
60mm high quality linear faders
Dual 13-segments LED level meter
2 audio groups
Stereo main output
Mono main output

Alesis 102140028-A RealHead Kick Pad, made in China

 

Link: alesis

Flying Mole CA-S3 Digital Integrated Amplifier, 2006, made in Japan

Link: flyingmole

Rated Output Power:

* 20Wx2/8Ohms, 20-20kHz
* 30Wx2/4Ohms, 20-20kHz

T.H.D.: 0.05% (10W/8Ohms/1kHz15W/4Ohms/1kHz)

Frequency Characteristics: 20Hz-20kHz (+0dB/-0.5dB) (/ 8Ohms,1W)

S/N Ratio: 98dB

Input Sensitivity: 150mV

Input Impedance: 50kOhms

Power Consumption: 15WOuter
Dimensions (WHD): 131 x 54 x 142 mm | 5-3/16 x 2-1/8 x 5-9/16
Max.Outer Dimensions (WHD): 131 x 54 x 179 mm | 5-3/16” x 2-1/8” x 7-1/16”

Weight: 1.4Kg / 3lbs1oz.

Soundcraft Spirit Folio F1 ader 100 14/2 Mixing Desk, 1990s, made in England

Link: soundcraft | Owner's Manual [PDF, en] | radiomuseum

Питание стандартное для многих пультов 2 x 18VAC со средней точкой - в данном случае это зеленый провод

Mic E.I.N. @ max. gain
20Hz - 20kHz, 150 Ohm source impedance: -129dBu
Aux, Mix & Masters at max., 10 inputs routed, faders down: < 85dBu
Crosstalk (@1kHz)
Channel Mute: >96dB
Fader Cut-off (rel 0 mark): >96dB
Aux Sends Pots offness: >89dB
Frequency Response
Mic/Line Input to any output, 20Hz - 30kHz: <1dB
THD + N
Mic sens. -30dBu, +20dBu at all outputs @1kHz: <0.006%
Input & Output Impedance
Mic Input: 1.8k Ohm
Line Input: 10k Ohm
Stereo Input (Unbalanced RCA Phono): 12k Ohm
Stereo Input (Balanced Jack): 10k Ohm
Mix & Aux Outputs, Insert Sends: 75 Ohm
Insert Returns: >10k Ohm
Input & Output Levels
Mic Input max. level: +22dBu
Line Input max. level: >30dBu
Stereo Input max. level: >30dBu
Headphones (@ 200 Ohm): 150mW
Weight: Exc. power supply unit: 3.4 kg/7.5 lb

Wega L 354, 1977, made in Germany

Link: radiomuseum | hifi-wiki | hifi-archiv

General
Manufacturer: Wega | Württembergische Radio-Ges. mbH; Stuttgart, Fellbach
Country: Germany

Model: L-354

Type: speaker
Years of construction: 1977 - 1979
Made in Germany
Color: walnut with anthracite bezel, steel blue with anthracite bezel, steel blue with steel blue bezel
Dimension (HxWxD): 398 (400) x 232 x 174 (180) mm
Weight:
New price approx.: 240 DM

Technical specifications

Design: 2-way, 2 loudspeakers, closed
Chassis:Woofer: ITT LPT175/25/120F [каучуковый подвес] - 175 mm cone 4 Ohm
Tweeter: Canton 2336 - 19 mm dome
Load capacity (nominal/music range): 40 W / 55 W
Efficiency:
Frequency response: 42 - 25,000 Hz
Transition ranges: 1,600 Hz
Impedance: 4-8 ohms

Special equipment

Front grille metal, unfortunately not removable

Anchor AN-1001X Unpowered Monitor Professional Speaker, made in USA

 

Link: anchoraudio | Brochure | Userguide | Specification Sheet

Description
The Anchor Audio AN-1001x is a 2-way, magnetically shielded, passive PA speaker. As a companion speaker for that company’s AN-1000 powered system, it features a durable, injection-molded enclosure, high output and a lightweight construction for easy transportation. This speaker is an inexpensive, well-crafted solution for use in video, computer and multimedia presentations and installations.

Features
- Passive, lightweight portable PA companion speaker
- Magnetically shielded for close proximity use with video and computer monitors
- Durable, injection-molded enclosure
- Metal grille woofer speaker cover
- Speaker Type: Passive PA Speakers
- Anchor Audio AN-1001X Unpowered Companion Speaker
- Mounting Bracket (Attached)

Product Specifications:
- Dimensions: 22 × 22 × 9 in
- Weight: 12 lbs

Specification
Low Frequency Driver : 4.5" Woofer [Anchor Audio INC #498-0041-000 тканевый подвес]
Mid Frequency Driver: No
High Frequency Driver : 1" Dome Tweeter [майларовый (лавсановый) купол]
Crossover : Not Specified by Manufacturer (фильтр первого порядка)
Frequency Range: 80 Hz - 20 kHz
Impedance: 8 Ohms
Maximum Power Handling: 50 Watts
Maximum Sound Pressure Level (SPL): 103 dB @ 1 m
Controls and Indicators: No
Connectors : 1/4" Speaker Cable In (from Main)
Shielded: Yes
Dimensions: 5.25 x 8.4 x 9" (130 x 210 x 230mm)
Weight: 9.5 lb (4.3 kg)
Specialties:
- Portable Passive

- Companion Speaker
- Magnetically Shielded

Sansui 331 FM/AM Stereo Receiver, 1974-1976, made in Japan

 

Link: radiomuseum | hifi-wiki

General

• Manufacturer: Sansui
• Model: 331 (version 331 L with long shaft, version 331 SS without MW, but with KW 1 and KW 2)
• Years of construction: 1974 - 1976
• Manufactured in: Japan
• Colour: silver, wooden case
• Remote control: -
• Power consumption: 90 W max.
• Dimensions: 424 x 125 x 266mm
• Weight: 5.7kg
• New price approx.: 695 DM

connections

• Number of inputs:
  • Phono MM: 2.5 mV / 50 kOhm, 120 mV max.
  • AUX: 150mV / 50k ohms
  • Tape Play: 150mV / 50k ohms
  • Tape Play DIN: 150 mV / 50 kOhm
  • antenna MW
  • Antenna VHF 300 Ohm Balanced
  • Antenna VHF 75 Ohm Unbalanced
• Number of exits:
  • Tape Rec: 150mV
  • Tape Rec DIN: 30mV
  • Headphones (6.3 mm jack, front)
  • 2 pairs of speakers

Tweeter Sansui s-65, made in Japan

Jolana Tornado serial #0079, 1963, made in Czechoslovakia

Link: jolana.info | Серийные номера гитар и бас-гитар Jolana