Fisher CA-3030 LW/MW/FM Stereo Receiver Studio Standard 70's


The Fisher RS-3030 comes from a series of high fidelity components utilizing the international chassis standards from EIA.
In design and technology, the RS-3030 is perfectly matched for combination with other machines in Fisher's slimline series.
The graphic equalizer EQ-3000 is a useful addition for exacting tone control with this receiver.
The tuner section of the RS-3030 is equipped with station pre-set selectors for ease of tuning. Five separate broadcast frequencies can be selected for recall at the push of a button. The selected broadcast is shown by the illumination of an LED and the approximate frequency is shown on the frequency meter. By selecting a sixth button, the unit is switched over to manual tuning mode.
As is the case with the tuner section, very high standards are achieved in the areas of power reserves, reproduction quality and reliability of the amplifier section.
The phono section is constructed to match perfectly with turntables with magnetic cartridges.


Tuning range: FM, MW, LW
Power output: 35 watts per channel into 8Ω (stereo)
Frequency response: 20Hz to 20kHz
Total harmonic distortion: 0.05%
Damping factor: 50
Input sensitivity: 2.5mV (MM), 150mV (line)
Signal to noise ratio: 65dB (MM), 85dB (line)
Output: 150mV (line), 4mV (DIN)
Dimensions: 440 x 135 x 334mm
Weight: 9.8kg