Sharp Optonica SM-3000, 1975, made in Japan


Link: radiomuseum
Country:
Japan
Manufacturer / Brand: Sharp; Osaka
alternative name Hayakawa Electric Co.Ltd.
Year: 1978/1979
Type: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) Semiconductors present.

Principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out
from Radiomuseum.org Model: Optonica SM-3000H - Sharp; Osaka
Material Metal case
Shape Tablemodel, low profile (big size).
Dimensions (WHD) 442 x 144 x 380 mm / 17.4 x 5.7 x 15 inch
Notes 2 x 50 W Sinus.
Mentioned in -- Original prospect or advert ((A) Kapsch Geräteprogramm 1978/79 mit Sharp Importgeräteteil)

Sharp Optonica SM-1616, made in Japan

Specifications: hifiengine
Power output: 32 watts per channel into 8Ω (stereo)
Frequency response: 15Hz to 60kHz
Total harmonic distortion: 0.2%
Damping factor: 40
Input sensitivity: 2.5mV (MM), 150mV (line)
Output: 150mV (line), 30mV (DIN)
Semiconductors: 2 x IC, 24 x transistors, 2 x FET, 17 x diodes
Dimensions: 442 x 144 x 253mm
Weight: 7.8kg

Downloads:
service manual


Dual CV 1260 CLASS A, 1985, made in Japan



Model: CV 1260
Years of construction: around 1985
Manufactured in: Japan (Denon)
Colour: satin metallic and anthracite metallic
Type: Analog
Remote Control: No
Power consumption: Idle 44 VA, Power Rating 500 VA, max. 680 VA
Dimensions: 440 x 97 x 265 mm (WxHxD)
Weight: 7 kg
Factory price approx .: 700 DM

CONNECTIONS
Number of inputs: 5

  • Phono (RCA), 2.5 mV / 47 kOhm (MM), 0.8 mV / 100 kilohms (MC)
  • Tuner (RCA), 200 mV / 47 kOhm
  • Tape1 (DIN), 200 mV / 47 kOhm
  • Tape2 (RCA), 200 mV / 47 kOhm
  • Monitor (RCA), 200 mV / 22 kOhm

Number of outputs:

  • 2x speakers (8-16 ohms)
  • 2x Rec Out Tape1 (DIN) / Tape2 (RCA) (Ri 470 Ohm)
  • Headphones 6,3mm

Technical specifications
Power Output

  • 8 ohm: 2x 50 watts
  • Music performance
  • 8 ohm: 2x 80 watts

Total harmonic distortion (up to 2 x 70 W, 1 kHz): 0.02%
Damping factor: > 70
Frequency response: 10-45000 Hz
Signal to noise ratio: 88 dB (line inputs), 68 dB (Phono MM), 61 dB (Phono MC)
Stereo channel separation:

  • between the channels: 55 dB
  • between the inputs: 70 dB

Tone control:

  • Bass and chief regulator
  • Loudness: switchable
  • High Filter: No
  • Low filter (subsonic): Yes
  • Mute: No
  • Direct / Line-Straight: No

Special Features
Record Selector via pushbuttons
Monitor output via pushbutton
two combined VU / watt meter illuminated,
Class A amplifiers


Teleton A660 Stereo Hi-Fi Amplifier, made in Japan


Country:  Europe Manufacturer / Brand:  Teleton Gruppe
Year: 1975 ??  Type: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) Semiconductors present.

Principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 
from Radiomuseum.org Model: Stereo Hi-Fi Amplifier A660 - Teleton Gruppe
Material Metal case
Shape Tablemodel, low profile (big size).
Dimensions (WHD) 420 x 0 x 320 mm / 16.5 x 0 x 12.6 inch
Notes Teleton Stereo Hi-Fi Amplifier A660; 5 DIN input, 2 VU meters, made in Japan.


 

Vermona Synthesizer, 1980-1990, made in Germany



Link: vintagesynth

Polyphony: Monophonic
Oscillators: 2 VCO's with Pulse, Ramp, Square and Noise waveforms
LFO: 1 LFO section with Speed, VCF-Modulation, and Delay
Filter: Analog 24 dB/oct with Brilliance, CutOff, Resonance, Contour
VCA: Attack, Decay, Sustain, Release
Keyboard: 44 keys
Memory: None (5 Presets for VCF, 1 User; 5 presets for VCA, 1 User)
Control: None
Date Produced: 1980 - 1990



Renkforce (Conrad / Wangine) HVA-8030 Concert 30, made in Taiwan (OEM / Japan)

Impedance 4-8 ohms
2 x 100 Watts Output
2x60W into 4 ohms
2x45W into 8 ohms
THD: 0.007%
Frequency response: 10-60000 Hz
2 pairs of speakers: A, B, A + B
PHONO, CD / AUX, TUNER, TAPE
Meters XO 1, Loudness, Bass, Treble and Balance
WxDxH 43 x 23 x 13 cm
Made in Taiwan хотя начинка вся made in Japan



Teleton Stereo Amplifier SAQ-408, 1975, Europe


Link: radiomuseum
Country: Europe
Manufacturer / Brand: Teleton Gruppe
Year: 1980 ?? Type: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) 18:
Principle Audio-Amplification
Wave bands - without
Details
Power type and voltage Alternating Current supply (AC) / 110-117; 220-240 Volt
Loudspeaker - This model requires external speaker(s).
Power out 20 W (unknown quality)
from Radiomuseum.org Model: Teleton Stereo Amplifier SAQ-408 - Teleton Gruppe
Material Wooden case
Shape Book-shelf unit.
Dimensions (WHD) 390 x 81 x 230 mm / 15.4 x 3.2 x 9.1 inch
Notes
  • 20-Watt Solid State Stereo HiFi-Amplifier.
  • Bass-, Treble-Control, Loudness, Hi Cut Switch.
  • 2 Diodes, 2 Rectifier Diodes. 
Net weight (2.2 lb = 1 kg) 3.5 kg / 7 lb 11.3 oz (7.709 lb)
Source of data - - Manufacturers Literature


GEM Galanti Group Rodeo 49 with drum machine, made in Italy

made in Italy
49 keys, 5 voices

Controls:
  • Voice Tabs: Flute, Brass, Reed, String, Wah (wah is a voice, not an effect!)
  • Vibrato: On/Off
  • Rhythm Tabs: Latin, Rock, Swing, and two more unknown (but who cares?)
  • Knobs: Volume, Drum Volume, Tempo
  • Magic chord 
  • Memory

Maestro synthesizer | Маэстро цифровой электромузыкальный синтезатор, 1982, made in USSR


Description: ruskeys | Manual/Schematics [PDF]

Keyboard electronic musical instrument (KEMI) "Maestro" is a portable polyphonic four-voiced synthesizer with microprocessor control (KR-580) & programmed timbres "presets". Number of presets- 20. There is possibility to get vibrato frequency with depth & frequency control. This instrument includes "chorus" effect with depth control, filter with cut-off frequency & resonance control. There are also "arpeggio-tremolo" arrangement with speed control and joystick that pitch shifts & vibrato depth controls.

Specifications:
Mains voltage 220V 
Power consumption 25W 
Range of operating tempererature 15-35 C 
Relative oscillator drift over four hours is within +- 0.3 
Sound range overlaped by oscillators - 43,6 Hz- 5274 
Voices in unison-4 
Dynamic range  <55 db 
Weight 15kg
Engineer: Vladimir Kuzmin, designer: Olympiada Kuzmina, produced by Urals Vector Company.

Faemi-1M | Фаэми-1М, 1982, USSR

Description: ruskeys

A polyphonic analog synthesizer Faemi - 1M (Kachkanarsky radiofactory) has a keyboard of 4 octaves. Main generator, infralow frequency generator, lowpass filter, amplifier are in the basis of the synthesis in this instrument. The control panel is divided into 5 sections: generator, timbre, vibrato, filter, amplifier.

Controls:
  • GENERATOR: release, tuning, glissando
  • TIMBRE: piano, strings, clavesin, wind instruments
  • VIBRATO (generator of pulse low frequency): frequency, depth, delay
  • FILTER: attack, decay, sustain, release, frequency, resonance, modulation
  • AMPLIFIER: volume
Engineer: Alexander Reunov, designer: Andrey Petukhov, produced by Formanta Katchkanar radio plant.



Fera / RFT (Fernseh-Radio) HiFi 50 Quadro-effekt, 1974, made in Germany



The amplifier 50 HiFi Quadro effect of PGH TV-Radio Berlin is the successor of the famous HiFi 50. He is the first hi-DDR-home amplifier having the connection for two additional speakers to pseudoquadrofonen playback. This process should not be a substitute for real quadraphony, but is intended as an improvement of the stereo reproduction that significantly improve the three-dimensional sound image despite the low technological effort. The electrical and mechanical properties would otherwise remain virtually unchanged compared to the HiFi 50, so the description largely done with the text. ifatwww.et.uni-magdeburg


The amplifier has on the rear side of the tape 5 inputs, phono, tuner, micro and specialty, the latter is mainly intended for the connection of electronic musical instruments that can be selected via a push-button set. The signals of the five inputs, which have a total of 3 different sensitivities are input, coupled to the base of the three-stage input amplifier via various passive RC networks. This is equipped with low noise Miniplast transistors, thermally very stable and due to strong negative feedback relatively insensitive to transistor manufacturing tolerances. An equalizer amplifier for magnetic sensing systems for the phono input is not provided in HiFi Quadro 50 effect.

The preamplifier is in two stages and also equipped with low-noise transistors. It allows dual potentiometer on the control for bass, treble, balance and volume, the latter is affected aurally. A rumble filter and the Mono button is still available, the existing the old model noise filter has been replaced by the contour button, which should provide at low volume for a more brilliant sound.

The power amplifier, a four-stage electrically coupled network is set up discretely, fully equipped with silicon transistors and operates as a quasi-complementary output stage in Darlington circuit. It is powered by unbalanced supply voltage and thus requires Auskoppelelkos. In a speaker protection circuit, and a delay was waived. Only an overdrive protection circuitry has been provided which abtennen briefly about each one relay the speakers at excessive level peaks.

The HiFi 50 provides connections for 2 speakers and a stereo headphone, said the non-switchable socket is located on the rear panel. He also has a red lamp as network control, and red clip indicators for both channels, in addition a green stereo display is now available.

The optical design of the HiFi 50 is simple and technically in a modern, slim case made of wood. The front panel is made of black painted aluminum and is labeled with a white screen printing in German. The round keys are made of black plastic with chrome cap, the knobs are made of chromed plastic.

Another variant has a two-part front with black frame and silver aluminum front panel. The keys are square and made of black plastic, as well as the knobs.

The HiFi 50 Quadro effect was presented at the Leipzig Autumn Fair 1974, the first time the public.

Оконечный усилитель собран на: 4 x Tungsram 2n3055 (Hungary) Silicon PNP Power Transistor

Сверхнизкий бас! Лютый кач! СЧ-ВЧ можно нерационально регулировать до максимума и получать тот самый песок в тугих АС. Рекомендую для тех кто ищет НИЗКИЙ БАС и яркое звучание. Отличная отработка по динамике.


Усилитель был взят за основу для построения Fera V150 в 1982 году. radiomuseum | rft-hifigeraete

Country:
  Germany
Manufacturer / Brand:  Fernseh-Radio Berlin (FERA), PGH; (Ostd)
Year: 1974  Type: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) 24:
Principle Audio-Amplification
Wave bands - without
Details 
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 50 W (undistorted)
from Radiomuseum.org Model: HIFI 50 Quadro-Effekt - Fernseh-Radio Berlin FERA, PGH
Material Wooden case
Shape Book-shelf unit.
Notes:
- stereo audio amplifier with 2 x 25 watts RMS output power into 4 ohms, 5 inputs, level meter, additional Quadro Effect speaker outputs. The design of the front panel has been changed during the production period several times.
- Operating voltage: 220V, 50Hz

- Power consumption at rated power: 155 W
- Sine Output Power: 2 x 25 W with k = 0.5%
- THD at f = 1000 Hz; 25 W: 0.5%
- Frequency response: 20 - 20000 Hz
- Signal to noise ratio at 25 W:> 50 dB
- Crosstalk at 1 kHz> 40 dB
- Input voltage range: 0.05 ... 2 V
- Setting "Bass" at f = 40 Hz: +/- 15 dB
- Setting "Treble" at f = 16 kHz +/- 15 dB
- Setting "Balance": +8 dB / -13 dB
Dimensions W x H x D: 430 x 100 x 250 mm
Weight: 6.8 kg
Price: 980, - M




Electro-Voice EVS - 8B CH-2560 nidau, made in Switzerland



Dimensions (HxWxD): 545 x 270 x 295 mm

НЧ: 185 mm
Рупор (по магниту): 57 mm
Фильтр первого порядка




Rocktron RSP Technologies Intelliverb 24-Bit Virtual Room Processor (w/psu), made in USA


This Rocktron RSP Technologies Intelliverb 24-Bit Virtual Room Processor (w/psu) is in very good working and playing condition and has been fully tested by our pro audio shop. wurlitzerboston

The unit shows normal signs of wear from use and rack mounting. The rack ear corners are slightly bent (refer to photos) and the level control switch button is missing although the control can still be pushed. Includes original power supply

Description:

The RSP Intelliverb is a 24 bit intelligent effects processor providing 6 unparalleled effect algorithms and superb sound quality not found in effect processors twice it's price. Complete programmability and full MIDI implementation are coupled with a user-friendly operating scheme to ensure that designing both unique and useful preset sounds is a simple as possible.

Providing Virtual Room reverberation, 4 voice pitch shifting, 8 voice stereo chorus, various types of delay effects, delay ducking and HUSH Systems' fully digital implementation of HUSH noise reduction, the impressive sonic quality of the Intelliverb is, in part, due to the incorporation of three individual 16 bit converters and Sigma-Delta A/D conversion, achieving a 64x oversampling rate and dynamic range of over 100db.

To achieve the maximum possible performance (zero wait states) from the Digital Signal Processor (DSP) engine, the Intelliverb uses a large number of very fast (and expensive) Static Ram (SRAM) memory IC's. All other digital effects processors we have examined, including ones costing several times the price of the Intelliverb, (except the Rocktron Intellifex), use much slower and cheaper Dynamic Rams (DRAMS). This extra-powerful hardware allows the Intelliverb's Virtual Room algorithm to achieve unequalled levels of room simulation.

Deviton (De Vivanco) model 4060 Hi-Fi Stereo Receiver | Project/One Mark IIIB Solid State Stereo Receiver, 1978-1982, made in Germany / Japan

 



Оконечный усилитель собран на: Hirel 218 R & 649 R

И так... Перед нами два агрегата Deviton (De Vivanco) model 4060 Hi-Fi Stereo Receiver и Project/One Mark IIIB Solid State Stereo Receiver. Они идентичны внутри и снаружи.

Country:  Germany
Manufacturer / Brand:  Vivanco AG (electronic); Ahrensburg
Year: 1978-1982
Category: Broadcast Receiver - or past WW2 Tuner 
Semiconductors (the count is only for transistors) Semiconductors present.
Main principle Superheterodyne (common) 
Wave bands Broadcast (BC) and FM or UHF. 
Details 
Power type and voltage Alternating Current supply (AC) / 220 Volt 
Model: Deviton 4060 - Vivanco AG electronic; / 
Project/One Mark IIIB
Material Metal case 
Shape Tablemodel with Push Buttons. 
Dimensions (WHD) 500 x 150 x 350 mm / 18.1 x 6.3 x 12.6 inch 
Net weight 16 kg

MANUFACTUR SPECIFICATIONS

FM tuner Section

Usable Sensitivity: 1.7μV (10.0dBf)

CaptureRatio: 1.5dB. 

Selectivity: 70dB 

S/N Ratio: 72dB(Mono) 

Image Rejection: 90dB 

I.f. Rejection: 10dB 

SpuriousRejection: 90dB 

AM Supresion: 5dB 

THD:

  • Mono at 1 kHz, 0.2 percent;
  • Stereo at 1kHz, 0.5percent. 

Frequency Response: 20Hz to 16kHz, +0.2dB, -3dB. 

Stereo Separation @1kHz: 45dB 


AMTunerSection

Selectivity: 20 μV (external antena) 

Selectivity: 30dB 

S/N: 50 db

Image Rejection: 45dB 

I.f. Rejection: 45dB 


Amplifier Section

Power Output:

for Deviton 4060 & Project/OneMark IIIB: 55 Watt per channel continious, 8 Ohm load, 20 Hz to 20 kHz (75 Watt with 4-ohm load)

for Deviton 4080 & Project/One Mark IVB: 75 Watt per channel continious, 8 Ohm load, 20 Hz to 20 kHz (95 Watt with 4-ohm load)

Rated THD: 0.1 percent.
Damping Factor: Greater than 35 

Residual Noise: 1mV

Input Sensitivity:

  • Phono 1 & 2: 2.5mV; 
  • AUX & Tape: 120mV
  • Mike (Microphone): 3mV 

Phono Overload: 130mV. 

Hum and Noise (A Weighted):

  • Phono 70 db
  • Mike (Microphone) 70 db
  • High Level 90 db

Frequency Response:

  • Phono, RIA±1 dB
  • HighLevel 10Hz to 35kHz, ±0.5 dB.

Tone Control Range:

  • Bass ±10dB @ 10Hz
  • Midrange ±5dB @ 1 kHz 
  • Treble ±10dB @10 kHz 

Filter Cut-Off Frequency:

  • High 8 or 12 kHz (12dB/octave)
  • Low 15 or 30 Hz (12dB/octave)

Price Deviton 4040: 998.00 DM

Price Deviton 4080 & Project/One Mark IVB: $549.95