Saba HiFi Studio 8070 Stereo K AM/FM Stereo Receiver, 1974-78, made in Germany


Link: radiomuseum | hifiengine

Country: Germany
Manufacturer / Brand: SABA; Villingen
Brand Schwer & Söhne, GmbH
Year: 1974–1978

Category: Broadcast Receiver - or past WW2 Tuner
Semiconductors (the count is only for transistors) 34:
Tuned circuits 8 AM circuit(s) 12 FM circuit(s)
Wave bands Broadcast, Long Wave, Short Wave plus FM or UHF.
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 36 W (undistorted)
Model: HiFi Studio 8070 Stereo K - SABA; Villingen
Material Modern plastics (no Bakelite or Catalin)
Shape Book-shelf unit.
Dimensions (WHD) 590 x 120 x 250 mm / 23.2 x 4.7 x 9.8 inch 


Notes

  • Tuning range: FM, MW, LW, SW
  • Power output: 18 watts per channel into 4Ω (stereo)
  • Frequency response: 30Hz to 20kHz
  • Total harmonic distortion: 0.3%
  • Damping factor: 20
  • Input sensitivity: 2.3mV (MM), 50mV (ceramic), 150mV (line)
  • Signal to noise ratio: 60dB (MM), 80dB (line)
  • Channel separation: 40dB (MM)
  • Speaker load impedance: 4Ω to 16Ω
  • Semiconductors: 2 x IC, 34 x transistors, 14 x diodes
  • Stereo system.
  • Output Power: 2 x 18 W (Sinus).
  • Two Loudspeakers (205 × 400 × 140 mm), type hi-fi speaker 35K, with 2 LS included. 
  • Housing colors according to Saba catalogs: stained walnut, matt white, black. The corresponding boxes each Suitable. Sale (also) on the World Radiocommunications at the Consumer Electronics Show 1975
  • Im Handbuch VDRG 1974/75 lediglich als HiFi Studio 8070 bezeichnet.
Net weight (2.2 lb = 1 kg) 6.6 kg / 14 lb 8.6 oz (14.537 lb)

Downloads
service manual


Часть фото из нашей мастерской:










Service Manual:




Комментариев нет:

Отправить комментарий