Link: Manual PDF | soundonsound
Specifications
Frequency ResponseLine-level Inputs and Outputs:
- +0, –1 dB, 10 Hz to 50 kHz
- +0, –3 dB, 5 Hz to 100 kHz
RIAA Equalization Deviation (Phono Input): ± 0.5 dB from 20 Hz to 20 kHz
Distortion (THD & IMD)
Line-level Inputs to Line-level Outputs (unity gain): > 0.015%, 20 Hz to 20 kHz @ +4 dBu
RIAA Input, Nominal Gain: > 0.015%, 20 Hz to 20 kHz @ +4 dBu
Noise Floor
(20 kHz Bandwidth, +4 dB level setting, 150Ω source)
Unity Gain, with DAW, 2-Track A, and 2-Track B Assigned: –86 dBu maximum (all outputs)
Monitor A, B, and C Outputs, Studio Output, DAW, 2-Track A, and 2-Track B Outputs: –90 dBu typical
Phono Input (nominal 41.8 dB gain @ 1 kHz, inputs shorted): –71 dBu maximum (all outputs)
Equivalent Input Noise (E.I.N.): 0.89 μV / –119 dBu maximum
Monitor A, B, and C Outputs, Studio Output, DAW, 2-Track A, and 2-Track B Outputs: –90 dBu typical
Phono Input (nominal 41.8 dB gain @ 1 kHz, inputs shorted): –71 dBu maximum (all outputs)
Equivalent Input Noise (E.I.N.): 0.89 μV / –119 dBu maximum
Common Mode Rejection Ratio
(20 Hz to 20 kHz @ +4 dB level setting):
- 34 dB minimum
- 40 dB typical
Crosstalk
Adjacent Inputs: 90 dB @ 1 kHz
Left to Right/Right to Left: 70 dB @ 1 kHz
Muted/Level Off: 90 dB @ 1 kHz
Trim Control Range
Input Trim Controls (Center Detented): ±10 dB
Output Trim Controls: –14 dB to 0 dB
Dim Switch: 0 dB/–20 dB
- 40 dB typical
Crosstalk
Adjacent Inputs: 90 dB @ 1 kHz
Left to Right/Right to Left: 70 dB @ 1 kHz
Muted/Level Off: 90 dB @ 1 kHz
Trim Control Range
Input Trim Controls (Center Detented): ±10 dB
Output Trim Controls: –14 dB to 0 dB
Dim Switch: 0 dB/–20 dB
Rated Input Voltage
Line Inputs (+4 dB Level Setting): +4 dBu/+28 dBu (nominal/maximum)
Line Inputs (–10 dB Level Setting): –10 dBu/+14 dBu (nominal/maximum)
RIAA Input (@ 1 kHz, nominal gain): 5 mV/79 mV (nominal/maximum)
Rated Output Voltage
All Line-level Outputs (+4dB Level Setting): +4 dBu/+22 dBu (nominal/maximum)
All Line-level Outputs (–10 dB Level Setting): –10 dBu/+8 dBu (nominal/maximum)
Maximum Voltage Gain
DAW, 2-Track A, and 2-Track B Input to:
Monitor A, B, and C Outputs: 34 dB
DAW, 2-Track A, 2-Track B, and Phones Amp Outputs: 24 dB
Studio Output: 34 dB
Phones 1 and 2 Outputs: 34 dB (output loaded @ 100 kΩ)
DAW Phone Mix Input to:
Phones Amp Outputs: 14 dB
Studio Output: 24 dB
Phones 1 and 2 Outputs: 24 dB (output loaded @ 100 kΩ)
Phono Input @ 1 kHz to:
Monitor A, B, and C Outputs: 67.8 dB
DAW, 2-Track A, 2-Track B, and Phones Amp Outputs: 57.8 dB
Studio Output: 67.8 dB
Phones 1 and 2 Outputs: 67.8 dB (output loaded @ 100 kΩ)
Input Impedance
Line Input:
- 24 kΩ balanced
- 12 kΩ unbalanced Phono Input
- 47 kΩ || 220 pF Output Impedance
Line Output:
- 300 Ω balanced
- 150 Ω unbalanced
- Headphone Output 150 Ω
Talkback Section:
Automatic Gain Control (AGC) Range: ±15 dB
Nominal Output Level: +4 dBu (+4 dB output level setting)
Output Level Range: Off to +10 dB
Nominal Microphone Input Sensitivity: 80 dB SPL
AC Power Requirement
U.S. 120 VAC, 60 Hz
Europe 240 VAC, 50 Hz
Japan 100 VAC, 50/60 Hz
Korea 220 VAC, 60 Hz
Power Consumption: 25 watts
Physical Dimensions:
Height: 3.2 in/81 mm (3.5 in/89 mm with Knob)
Height: 3.2 in/81 mm (3.5 in/89 mm with Knob)
Комментариев нет:
Отправить комментарий