Link: Owner's Manual [PDF, eng]
MS - micro series
SPECIFICATIONS
Main Mix Noise 20Hz-20kHz bandwidth, 1/4" Main out, channels 1-6 Trim @unity gain, channel EQS flat, all channels assigned to Main Mix, channels 1 and 3 Pan left, 2 and 4 Pan right.
Main Mix fader down, channel faders down: -100.0dBu
Main Mix fader unity, channel faders down: -86.5dBu (90dB Signal-to-Noise Ratio, ref +4dBu)
Main Mix fader @unity, channel faders @unity: -84.5dBu
Total Harmonic Distortion (THD) 1kHz @ +14dBu, 20Hz-20kHz
Mic in to Main out: 0.0025%
Attenuation (Crosstalk)
1kHz relative to OdBu, 20Hz-20kHz
bandwidth, Line in, 1/4" Main Out, Trim @unity
Main fader down: -85dBu
Channel Alt / Mute switch engaged: -84dBu
Channel fader down: -83dBu
Frequency Response
Mic input to any output
20Hz to 60kHz: +0dB/-1dB
20Hz to 100kHz: +0dB/-3dB
Equivalent Input Noise (EIN)
Mic in to Insert Send out, max gain
150 ohm termination: -129.5dBm unweighted
Common Mode Rejection (CMR)
Mic in to Insert Send out, max gain
1kHz: better than -90dB
Maximum Levels
Mic in: +14dBu
Tape in: +16dBu
All other inputs: +22dBu
Main Mix XLR out: +28dBu
All other outputs: +22dBu
Impedances
Mic in: 1.3 kilohms
Channel Insert return: 2.5 kilohms
All other inputs: 10 kilohms or greater
Tape out: 1.1 kilohms
All other outputs: 120 ohms
EQ
High Shelving: +/-15db @ 12kHz
Mid Peaking: +/-12dB @ 2.5kHz
Low Shelving: +/-15db @ 80Hz
Power Consumption
120VAC, 50/60Hz, 25 watts
Fuse Rating
120V: 500mA slo blo, 5 x 20mm
220-240V: 250mA slo blo, 5 x 20mm
Комментариев нет:
Отправить комментарий