Sonicware LiveN Bass & Beats WaveTable Bass Synthesizer and Drum Machine model: LVN-030, 2022, designed by Sonicware in Japan / assembled Malaysia

 

Link: sonicware

Specifications
<Size>
297mm (W) x 176mm (D) x 48mm (H)
11.7 in (W) x 6.92 in (D) x 1.89 in (H)

<Weight>
790g
1.74lb.

<keyboard>
27 keys (with a hold function)

<Knob>
- 15 physical control knobs
- Optional LATCH function prevents jumps in value when knob position and parameter values do not match.
- LCD dot indicates when a parameter value matches the saved value, or when the value has been changed.
- One physical encoder.

<Audio output>
- Stereo line out (stereo 3.5mm mini jack)
- Headphone out (stereo 3.5mm mini jack)
- Compatible with Teenage Engineering Pocket Operator2 Series SYNC OUT
- Speaker

<Audio in>
- LINE IN (stereo 3.5mm mini-jack)
- Compatible with Teenage Engineering Pocket Operator 2 Series SYNC IN

<Interfaces>
- MIDI IN connector (5-Pin DIN type)
- MIDI OUT connector (5-Pin DIN type)
- SYNC IN jack (monaural 3.5mm mini jack)
- SYNC OUT jack (monaural 3.5mm mini jack)

<Power supply>
- 9V DC output AC adapter
Current: 1A or greater
Plug Type: EIAJ3 Standard
Inner Diameter: 1.7mm
Outer Diameter: 4.75mm,
Polarity: Center +
- Compatible with power supplies designed for the Korg Volca 1 .
- 6 AA batteries

<Bass Synth Engine>
- Engine: Wavetable OSC, Sub OSC, Noise
- Wavetable: 64 types
- Sub OSC Waveform: Sine, Square, Sawtooth, Reverse Sawtooth, Triangle, Random
- Noise: White noise, Pink noise and others, all 16 types
- Voices: Monophonic

<Rhythm Engine>
- Engine: PCM, polyphonic
- Rhythm sounds: More than 350
- SE/SFX sounds: More than 100 types

<Mixer function>
- Volume and Reverb send adjustment for bass, rhythm and external input
- Sidechain comp (applied to bass and external input)

<Bass Patch Memory Detailed Edit>
The following parameters can be adjusted:
- OSC1, OSC2, SUB, NOISE
- Oscillator level and pitch
- Three types of oscillator waveforms.
- Oscillator waveform position
- Oscillator start phase
- Oscillator output destination
- Oscillator parameter type
- Oscillator parameters
- Oscillator unison (number, detuning, blend amount)
- Noise (type, level)
- Filter (LPF / BPF / HPF, Frequency, Resonance)
- Distortion
- LFO (shape, rate, depth, start delay time, BPM sync, start phase)
- Amp EG, MOD EG (level, time, curve, inversion, start delay time)

<Drum Kit Detail Edit>
The following parameters can be adjusted:
- Level
- Pan
- Pitch
- Attack/Decay
- Amount of send to reverb
- Reverse playback
- Total EQ

<Bass Voice Mode>
- Mono mode
- Legato mode
*Glide time can be adjusted.

<Functions for bass>
- Assignable knob x2
- Machine gun effect
- SWEEP (speed and shift amount can be adjusted)
- DIMENSION
- Vibrato (rate and depth can be adjusted)

<Functions for Rhythm>
- MUTE for each instrument
- Quick control of volume, decay and tune for KICK, SNARE, and HAT.

<Master Effect>
- Hall
- Room
- Mono Reverb
- Chorus
- Flanger
- Delay
- Bit Crusher
- Distortion
- High Pass Filter
- Low Pass Filter
- Isolator
- Tilt EQ

<Sound memory>
- Bass patch memory (128 patches)
- Drum kit (128 patches)

<Sequencer>
- bass track + rhythm tracks
- Up to 64 steps
- 128 patterns
- Note length can be set from 1/1 to 1/32.
- Support for long note ties
- Track level can be set.
- The amount of send to the effect can be set for each track.
- Pattern BPM and global BPM can be set.
- Track copy and paste function
- Steps copy and paste function
- Transpose function
- Real-time and non-real-time recording
- Direct note input to steps
- Parameter lock function (UNDO/REDO possible)
- Parameter lock function (UNDO/REDO possible) - Random playback with configurable playback step units
- STUTTER
- The probability of note pronunciation can be set from 25 to 100%.
- Pattern chain function
- Metronome, pre-count function
- Swing function

<MIDI>
- Note on/Off, control change, clock input/output
- IMPORT/EXPORT of user data
- Firmware update

<Accessories>
- Warranty card
- Overlay-Panel for editing bass patches
- Overlay-Panel for editing drum kits

*The AC adapter is not included.
Please use 9V DC output AC adapter (1A or higher, EIAJ3 standard inner diameter 1.7mm outer diameter 4.75mm, center +).