Avid 888 I/O Digidesgin MH070-AV REV N White Interface, 1999, made in USA / Mexico

Link:

Product Details

• Avid 888 Model MH068-AV
• Analog-to-Digital Converters: 1-bit Delta-Sigma;128x Oversampling; 16-bit (18-bit with PCI). 
• Digital-to-Analog Converters: 18-bit; 64x Oversampling. 
• Operating Level: +4 dBu nominal (factory calibrated to 18dB headroom). 
• Maximum Input Level: +26dBu. 
• Frequency Response: 20Hz to 20kHz, +/-1dB. 
• Signal-to-Noise Ratio: -104dB (A-Weighted). 
• THD + N: .004%, 0 dbFS @ 1kHz, 22 Hz - 22 kHz bandwidth. 
• The 888 I/O is an audio interface used with Pro Tools Project (3.2 or later), Pro Tools III (3.0 or later), or Session 8 PC (2.5 or later). It connects to any of the following cards: PT Project, Disk I/O, Bridge I/O, or Session 8 PC I/O. 
• Analog Input/Output: Balanced XLR, pin 2 hot, internally switchable +4dBu/-10dBu per channel. Output Impedance: 50ohms typical (45 min, 55 max) 
• Input/output Level Trim: 6-turn cermet trims. 
• Digital I/O: 4 AES/EBU pairs (XLR); 1 S/PDIF pair (RCA); 16-bit I/O on NuBus/PC, up to 24-bit I/O on PCI