Infrequent Sound [sex.tex] technology: Behringer V-verb PRO REV2496 rev. 1.2 Ultra High-Performance 24-Bit/96 kHz Dual-Engine Reverb Modeler, 2003, made in China

Link: behringer | soundonsound | Owner's Manual [ver 1.0]

The BEHRINGER V-VERB PRO REV2496 is a reference-class reverb modeler that simulates some of the world’s most renowned reverb processors. It draws its strength from two independent effects processors that can be accessed via both analog and digital connectors. It also features 8 high-end reverb algorithms modeled after world-class reverb processors, plus additional high-quality modulation effects from X-Over Delay to Chorus/Flanger, as well as a stereo Compressor.

Thanks to its high-quality 24-bit/96 kHz A/D and D/A converters plus full 96 kHz operation of both effects processors (all 4 channels!), the REV2496 guarantees absolute high-end performance.

There are 10 different routing configurations for flexible assignment of analog and digital signals to both stereo engines. A full-featured digital interface with AES/EBU In/Out, optical S/PDIF In/Out, Wordclock In and MIDI capability allow flexible integration with other digital equipment. An ultra high-resolution SHARC® processor with 32-bit internal signal processing, ensures the ultimate in sonic resolution.

In spite of all these impressive features and state-of-the-art performance, the REV2496 is intuitive and easy to use, with its soft push/turn encoders, big preset wheel, high-resolution LCD display, plus its TAP button for manually entering delay times. Direct access to 4 effect parameters makes editing easy and comfortable, and you can edit up to 30 parameters using our specially designed graphic mode. Separate ROM and user preset banks put a total of 400 presets at your fingertips—and open architecture allows future software updates via MIDI. Of course, you also get balanced inputs and servo-balanced outputs with gold-plated XLR and ¼" TRS connectors.

Specifications:

ANALOG INPUTS
Type:
- XLR balanced
- 1/4" TRS stereo balanced
Impedance Max. input level: +16 dBu
CMRR: typ. 40 dB

ANALOG OUTPUTS
Type:
- XLR, servo-balanced
- 1/4" TRS stereo servo-balanced
Impedance: approx. 100 Ω balanced
Max. output level: +16 dBu

SYSTEM SPECIFICATIONS
Frequency range:
- <10 Hz - 20 kHz @ 44.1 kHz
- <10 Hz - 22 kHz @ 48 kHz
- <10 Hz - 46 kHz @ 96 kHz
Signal-to-noise ratio: -90 dBu
Dynamic range: 106 dB (analog in ß analog out)
THD: 0,007% typ. @ +4dBu, 1 kHz, Gain 1
Crosstalk: < -100 dB (analog in ß analog out)
Signal delay: < 1 ms (analog in ß analog out)

DIGITAL INPUT 1
Type: XLR servo-balanced
Standard: AES/EBU or S/PDIF
input impedance: 110 Ω
nominal input level: 0.2 - 5 V peak-to-peak

DIGITAL INPUT 2
Type: TOSLINK optical
Standard: AES/EBU or S/PDIF

DIGITAL OUTPUT 1
Type: XLR servo-balanced
Standard: AES/EBU or S/PDIF

DIGITAL OUTPUT 2
Type: TOSLINK optical
Standard: AES/EBU or S/PDIF

SYNC INPUT
Type: BNC
Standard: Wordclock (1 x sample rate)
input impedance: approx. 50 kΩ
Nom. level: 2 - 6 V peak-to-peak

MIDI Interface
Type: 5-pin DIN jacks In/Out/Thru

Implementation: cf. MIDI implementation chart

DIGITAL PROCESSING
Processor: high-resolution SHARC® DSP 600 MFLOPs, 32-bit internal signal processing
Converter: 24 Bit/96 kHz
Sample rate: external, 44.1 kHz, 48 kHz, 96 kHz

DISPLAY
Type: 128 x 64 backlit liquid crystal display (green) with adjustable contrast

MEMORY
Presets:
- 100 ROM + 100 user presets for engines A and B
- 100 ROM + 100 user presets for combinations

POWER SUPPLY
Mains voltage: 85-250 V~, 50-60 Hz
Power consumption: 10 W typ.
Fuse: T1AH
Mains connector: Standard receptacle

DIMENSIONS/WEIGHT
Dimensions: 19" (482,6 mm) x 1 3⁄4" (44,5 mm) x 8 1⁄2" (217 mm)
Weight: approx. 4 3⁄4" lbs. (2.15 kg)