Fera / RFT (Fernseh-Radio) V 150 Quadro-effekt, 1981, made in Germany


Link: radiomuseum
The HiFi amplifier V150 is technically the successor to the HiFi 50 and a part of the component system Fera 150 from the PGH TV-Radio Berlin. It is based technically, as well as the rest of the resort, on a proven and reliable switching principle with good technical parameters, but for which also caused no real innovations in the GDR market. ifatwww.et.uni-magdeburg

The amplifier has 5 inputs TA, TB 1, TB 2, Tuner and Reserve (eg for a television set), which can be dialed in an amplifier from the GDR, via a rotary switch instead of push buttons set the first time on the rear panel. The signals of 5 high level inputs are from the rotary switch to a common input amplifier as an impedance converter, which is equipped with low-noise transistors supplied.

The preamplifier is built in classical discrete circuitry. It is equipped with two-stage and low-noise transistors, the tone controls for bass and treble, as well as the volume and balance control is provided by dual potentiometer. The loudness control can be disabled with the "Linear" button continue you can switch to "Mono".

The power amplifier, a four-stage electrically coupled network is set up discretely, fully equipped with silicon transistors and operates as a quasi-complementary output stage. It is powered by unbalanced supply voltage and thus requires Auskoppelelkos. In a speaker protection circuit, and a delay was waived.

The V 150 provides connections for 4 loudspeakers, two of them to pseudoquadrofonen playback. The two pairs are selected via a rotary switch, for pure stereo or Pseudoquadrobetieb. The headphone jack located on the front panel is therefore not, as usual, be controlled because the speaker can be either manually shut down with the rotary switch.

The V 150 has a red LED as power control, on the overload indicators used at HiFi 50 but was omitted.

The visual design of the Fera devices is plain and technically, but through the relatively large housing made of wood a bit old-fashioned for its time.

The plant was silver and black property offers in the colors of both the housing and the aluminum front panels are painted in the respective color. Deviating there are also silver anodized front panel, the label carried by a black or white screen-printing in German. In the first devices only "Fera" was a label on the unit, later additionally "RFT".

The knobs and buttons are made with the silver vessels made of metal, in the black plants made of plastic, the back wall is made of cardboard.

The Fera V 150 was presented at the Leipzig Autumn Fair 1981, the first time the public.


Усилитель является продолжением Fera HiFi 50. radiomuseum | rft-hifigeraete | Infrequent Sound.


Сверхнизкий бас! Лютый кач! СЧ-ВЧ можно нерационально регулировать до максимума и получать тот самый песок в тугих АС. Рекомендую для тех кто ищет НИЗКИЙ БАС и яркое звучание. Отличная отработка по динамике.

Technical specifications:
Country:  Germany
Manufacturer / Brand:  Fernseh-Radio Berlin (FERA), PGH; (Ostd)
Year: 1982 Type: Audio Amplifier or -mixer
Semiconductors (the count is only for transistors) 20:
Principle Audio-Amplification
Wave bands - without
Details 
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out 60 W (undistorted)
Model: Fera V150 - Fernseh-Radio Berlin FERA, PGH
Material Wooden case
Shape Book-shelf unit.
Dimensions (WHD) 436 x 98 x 250 mm / 17.2 x 3.9 x 9.8 inch
Notes

  • HiFi stereo amplifier with 5 inputs
  • 4 speaker outputs
  • optionally switchable stereo or Quadro effect playback or headphones
  • Output power 2 x 30 Watts RMS into 4 Ω
  • Frequency response 30 ... 20,000 Hz.
Bestandteil der Anstellanlage FERA HiFi-Komplex 150 (Tuner T150, Verstärker V150, Fonoautomat P224, 2 Boxen K150, 2 Boxen B10).
Operating voltage: 220V, 50 Hz
Power consumption at rated power: 170 W
RMS output power: 2 x 30 W for k = 0.5%
THD at f = 1000 Hz; 30 W:. , , , , , , , , , , , 0.5%
Transmission area : 20 - 20000 Hz
Signal to noise ratio at 30 W : > 55 dB
Crosstalk at 1 kHz. > 40 dB
Input voltage range: 0.22 ... 2 V
Setting "Bass" at f = 40 Hz +/- 15 dB
Setting "Treble" at f = 16kHz +/- 15 dB
Setting "Balance": +3 DB / -10 dB
Net weight (2.2 lb = 1 kg) 7 kg / 15 lb 6.7 oz (15.419 lb) 
Dimensions W x H x D 436 x 98 x 250 mm
Price in first year of sale 900.00 DM
Collectors' prices  
Source of data Radiokatalog Band 2, Ernst Erb
Mentioned in -- Schematic








Fera / RFT (Fernseh-Radio) Fera T150 Stereo Tuner, 1981-1982, made in Germany


Link: radiomuseum | ifatwww.et.uni-magdeburg | rft-hifigeraete


Der HiFi-Tuner T 150, der nur auf den meistgenutzten Wellenbereichen UKW und MW empfdngt, ist zwar technisch eine Neuentwicklung, jedoch wurden einige geplante Austattungsmerkmale nicht genehmigt im Endeffekt dann doch nicht mit produzi Dadurch entstand trotz neuer Technik ein eher konventionelles und einfach ausgestattetes Gerdt mit guten technischen Parametern.

Der AM-Empfangsteil ist für den Empfang von Sendern im MW-Bereich ausgelegt. Als Mischstufe, Oszillator und ZF-Verstärker wird der IS A 244 eingesetzt, die Abstimmung erfolgt mit einem Zweifachdrehkondensator. Die Selektion erfolgt durch einen sechskreisigen piezokeramischen Kompaktfilter, weiterhin ist ein aktiver 5 kHz-Filter gegen Interferenzpfeifen vorgesehen.

Im FM-Bereich, der den Frequenzbereich 87.5 bis 104 MHz empfdngt, findet ein Tuner Typ 2 mit Bipolar-Transistoren als Eingangsteil Verwendung. Er ist berber einen conventionellen Drehkondensator mit Kreisen hoher Göte dreifach abgestimmt und erreicht so sehr gute Selektions- und Groäsignaleigenschaften. Weiterhin wird der Schaltkreis A 225 als Demodulator verwendet, zusätzlich wird dort die Spannung für die AFC und die Feldstärkeanzeige gewonnen. Im Stereodekoder kommt der IS A 290 zum Einsatz, welcher nach dem PLL-Prinzip arbeitet.

Beim Fera T 150 kommt eine Computer-AFC, die es ermцglicht, trotz gedrcker AFC-Taste einen Sender zu suchen. Wird der Abstimmknopf ein kleines biächen gedreht, schaltet die AFC ab und ermöglicht so ein exaktes abstimmen eines Senders. Ungefähr 2 Sekunden nach loslassen des Knopfes schaltet sich die AFC automatisch wieder ein und fngtngt den eingestellten Sender.
Weitere Austattungsmerkmale sind ein MPX-Filter zur Unterdrückung von hochfrequenten Signalanteilen, und die schaltbare Mutingfunktion zur Unterdrückung des Zwischensenderrauschens bei der UKW-Senderabstimmung. Auäerdem kann bei UKW-Betrieb auf Zwangs-Mono umgeschaltet werden.

Als Abstimmanzeige wird ein conventionelles Drehspulinstrument verwendet, welches, wie auch die Hauptskala, grén beleuchtet ist. Als Netzkontrolle und als Stereoanzeige kommt je eine rote LED zum Einsatz.
Auf weitere Besonderheiten wie z. Senderspeicher oder ein beleuchteter Skalenzeiger wurde beim T 150 verzichtet.

Später wurde eine leicht bärarbeitete Variante des Fera T 150 produziert. Als erstes wurde eine zusätzliche Taste zum manuellen Abschalten der AFC vorgesehen. Weiterhin wurde das Drehspulinstrument für die Feldstärke durch eine LED-Kette mit sechs senkrecht stehenden LED's ersetzt. Daraus ergeben sich auch technische Dnderungen in der Schaltung, da z.B. ein IS A 277 der LED-Kette ansteuert. Ob noch weitere technische Dnderungen vorgenommen worden, kann ich leider nicht sagen.

Die optische Gestaltung der Fera-Gerde ist schlicht und technisch gehalten, aber durch die relativ groäen Gehuse aus Holz auch für die damalige Zeit schon etwas altmodisch.
Die Anlage wurde in der Farben silber und schwarz angboten, wobei sowohl die Gehäuse, als auch die Aluminum frontblenden in der jeweiligen Farbe lackiert sind. Davon abweichend gibt es auch silber eloxierte Frontblenden, die Beschriftung erfolgte per schwarzem, bzw. weiem Siebdruck in deutscher Sprache. Bei den ersten Gerätten stand nur "Fera" als Bezeichnung am Gerät, später zusätzlich noch "RFT".
Die Knöpfe und Tasten sind bei den silbernen Gerdten aus Metall, bei den schwarzen Anlagen aus Plastik gefertigt, die Röckwand ist aus Pappe.

Der Fera T 150 wurde auf der Leipziger Herbstmesse 1981 das erste Mal der Cffentlichkeit präsentiert.

Родной усилитель в комплект: Fera / RFT (Fernseh-Radio) V 150 Quadro-effekt, 1981, made in Germany

Дикой чувствительности приём, в стерео ловит без внешней антенны  внутренней антенны не предусмотрено. В дальнейшем примем к сведению, что антенны более вообще не нужны.

Country: Germany
Manufacturer / Brand: Fernseh-Radio Berlin (FERA), PGH; (Ostd)
Year: 1982
Category: Broadcast Receiver - or past WW2 Tuner
Semiconductors (the count is only for transistors) 15:
Main principle Superheterodyne (common); ZF/IF 455/10700 kHz
Tuned circuits 14 FM circuit(s)
Wave bands Broadcast (BC) and FM or UHF.
Details
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - This model requires external speaker(s).
Power out
Model: Fera T150 - Fernseh-Radio Berlin FERA, PGH
Material Wooden case
Shape Book-shelf unit.
Dimensions (WHD) 436 x 98 x 250 mm / 17.2 x 3.9 x 9.8 inch
Notes

  • FM Bereich 87,5-104 MHz, Tuner-Typ 2 mit Bipolartransistoren, 3-fach Drehko, Computer-AFC, MPX-Filter, Zwangsumschaltung auf MONO bei schlechtem Signal;
  • AM-Mischstufe, Oszillator und ZF-Verstärker mit IS A244, 5-kHz-Filter gegen Interferenzpfeifen, Feldstärkeanzeige mit Drehspulinstrument (später durch LED-Anzeige ersetzt).
  • Tuner als Bestandteil der Anstellanlage FERA HiFi-Komplex 150 (Tuner T150, Verstärker V150, Fonoautomat P224, 2 Boxen K150, 2 Boxen B10).

Net weight (2.2 lb = 1 kg) 3.5 kg / 7 lb 11.3 oz (7.709 lb)
Price in first year of sale 390.00 DM
Mentioned in radio fernsehen elektronik 1982; H.12
Literature/Schematics (1) Zeitschrift RFE 1983, Heft 6

Technische Daten:
Betriebsspannung:. . . . . . . . . . . . . . . . . . . 220 V, 50 Hz 
Leistungsaufnahme: . . . . . . . . . . . . . . . . . 6 W 
Wellenbereich MW:. . . . . . . . . . . . . . . . . . 510...1620 kHz 
Wellenbereich UKW:. . . . . . . . . . . . . . . . . 87,5...104 MHz 

AM-Teil 
Empfindlichkeit: . . . . . . . . . . . . . . . . . . . . 40 dB (µV) 
Trennschärfe: . . . . . . . . . . . . . . . . . . . . . . 45 dB 
Obere Grenzfrequenz: . . . . . . . . . . . . . . . . 2,2 kHz 
Klirrfaktor:. . . . . . . . . . . . . . . . . . . . . . . . . < 5,0 % 

FM-Teil 
Empfindlichkeit mono: . . . . . . . . . . . . . . . -13 dB (pW) 
Empfindlichkeit stereo:. . . . . . . . . . . . . . . ?? µV 
Trennschдrfe:. . . . . . . . . . . . . . . . . . . . . . . 60 dB 
Obere Grenzfrequenz: . . . . . . . . . . . . . . . . 15 kHz 
Fremdspannungsabstand: . . . . . . . . . . . . . 60 dB 
Klirrfaktor stereo: . . . . . . . . . . . . . . . . . . . < 1,0 % 
Zübersprechdämpfung bei 1 kHz:> . . . . . . 36 dB 

Ausgangsspannung: . . . . . . . . . . . . . . . . . 500 mV 





Sony SQA-200 Stereo Quadraphonic Decoder Amplifier, [serial #53935] 1972-1974, made in Japan




Link: radiomuseum | youtube | hifiengine


Description


Welcome to the world of the quadraphonic four-channel stereo sound.

Stereo Quadraphonic sound adds depth to stereophonic sound because the sound is reproduced over four widely separated speakers, giving an impression of surround sound.

With SQ sound, a symphony orchestra is not only displayed over the two front speakers as in conventional stereo, but its reverberant sounds are provided over back speakers, bringing actual concert hall presence to the listener.

Also with this SQ system individual performers can be recorded to create new musical effects with the listener being completely enveloped by 360° sound; or, a performer can freely move around as in theatre or show recordings left, right, front or back.

Quadraphonic sound reproduction is now possible with your present high fidelity music system by using the Sony decoder amplifier Model SQA-200 (which has an amplifier and also two output connectors for the back speakers) and two additional back speakers.

When playing 4-channel SQ records, the special decoder in the SQA-200 provides reproduction of the original program on four separate channels.

With the SQA-200 you can play SQ records on a conventional stereophonic player, and record and play back the SQ sound on a two channel tape recorder.

Conventional stereophonic programs become more dynamic with outstanding front channel separation and back channel separation, and accurate positioning of each musical instrument.




Оконечный усилитель собран на: 4 x Sony D291.


Year: 1973?

Category: Audio amplifier or mixer 
Semiconductors (the count is only for transistors) 42: 
Main principle: audio amplification 
Wave bends - without 
Details 
Power type and voltage (AC) / 110; 127; 220; 240 volts 
Speaker: this model requires external speaker(s). 
Output power 16 W (max 30 W) 
Model: SQ decoder/amplifier SQ-200 - Sony Corporation; Tokyo 
Material: wooden casing 
Shape: bookshelf 
Dimensions: (WHD) 312 x 73 x 280 mm / 12.3 x 2.9 x 11 inches 
Notes:
Sony SQ-decoder/amplifier SQ-200 is a combined stereo quadrophonic sound decoder and amplifier for two real speakers as an addition to an existing stereo system for four-channel reproduction. When playing 4-channel SQ records, the special decoder in the SQ-200 offers reproduction of the original program on four separate channels. 

Net weight: (2.2 lb = 1 kg) 3.650 kg / 8 lb 0.6 oz (8.04 lb)


Downloads
instruction/owners manual
1972 service manual (USA/AEP)
1973 service manual (USA/AEP/CAN/UK)

Canton LE-350, 1974, Made in Federal Republic of Germany




Link: radiomuseum
Country:  Germany
Manufacturer / Brand:  Canton, Weilrod
Year: 1974 Type: Loudspeaker, headphone or earphone
Wave bands - without
Details 
Power type and voltage No Power needed
Loudspeaker 2 Loudspeakers
Power out
from Radiomuseum Model: LE350 - Canton, Weilrod
Material Wooden case
Shape Miscellaneous shapes - described under notes.
Dimensions (WHD) 360 x 205 x 190 mm / 14.2 x 8.1 x 7.5 inch
Notes
  • 2-way hi-fi speaker with 35 watts RMS.
  • 4-8 ohms impedance.
  • Frequency response 40-25000 Hz Crossover (slope 10/14 dB): transition at 1400Hz.
  • Volume: 12.6 liter Gross.
Finish: natural walnut or polyester coating in white or anthracite. Run Gelochtes Alloy grid. High or provide cross. Suspension. 5-meter connection cable with standard plug firmly mounted.

Net weight (2.2 lb = 1 kg) 5.7 kg / 12 lb 8.9 oz (12.555 lb) 
Source of data -- Original prospect or advert


Westra ST-57-02 4 Ohm Alnico Tweeter, made in Germany


Model: Westra ST-57-02
Impedance: 4 Ohm
Magnet type: Alnico


Victor JVC Nivico MCA-V7E Solid State 4 Channel Integrated Amplifier, 1971-1972, made in Japan


Link: hifiengine | Re-capping | Service Manual | service manual | MCA-V7 | MCA-V7B

Грамотно выполнена схемная разводка, земля из одной точки на слаботочные входные и силовые выходные цепи. Каждая пара усилителей с зеркально- перевернутой трассировкой печатной платы, ручная разводка, дорожки нарисованы со стороны деталей. Выходные транзисторы и терморезисторы крепятся на промежуточную алюминиевую пластину, которая уже потом крепится к радиатору. Все это удобно для диагностики и ремонта. Модульная конструкция.

Total dynamic power:

90W (45Wx2) 2CH 8Ω IHF
60W (15Wx4) 8Ω IHF

RMS continuous power (All channel driven):
48W (12Wx4) 4Ω
36W (9Wx4) 8Ω

THD: 0.2%



Power bandwidth: 30-30,000Hz
Frequency response: 20-40,000Hz (+0dB~-1.5dB)

Total harmonic distortion: 0.2%
Damping factor: 50

S/N ratio:
Phono: 80dB
AUX: 85dB
Tape: 85dB
Tuner: 85dB

Input sensitivity:
Phono: 1mV
AUX: 50mV
TAPE MON.: 150mV

Tone control:
Bass: ±10dB at 100Hz
Treble: ±10dB at 10 kHz

Power source: AC 100-240V selectable, 50/60Hz
Dimensions (HxWxD): 140 x 432 x 305 mm

Weight: 10kg



Thorens TD105 mkii 2-Speed Belt-Drive Turntable, 1981-1984, made in Germany


Link: radiomuseum | vinylengine

Country: Switzerland
Manufacturer / Brand: Thorens SA; St. Croix
alternative name Thorens Inc., N.Y.
Year: 1981–1984

Category: Sound/Video Recorder and/or Player
Semiconductors (the count is only for transistors) Semiconductors present.
Wave bands - without
Details Record Player (not changer)
Power type and voltage Alternating Current supply (AC) / 220 Volt
Loudspeaker - For headphones or amp.
Power out
Model:
TD-105 MKII - Thorens SA; St. Croix
Material Wooden case
Shape Tablemodel, with any shape - general.
Dimensions (WHD) 435 x 125 x 355 mm / 17.1 x 4.9 x 14 inch
Notes

  • Riemengetriebener Halbautomat.
  • 33 1/3 U/min, 45 U/min. Plattenteller: Zinkspritzguss, 300 mm, 1,3 kg.
  • Pitch: ±6 %, Tonarm: TP 22, System/Nadel: Stanton TH 500-E. 
Net weight (2.2 lb = 1 kg) 5.5 kg / 12 lb 1.8 oz (12.115 lb)