Link: akaipro | Owner's Manual [PDF, ru]
MPC500 is a 48-track sequencer with a 32-voice stereo sampler. It has 12 velocity and pressure-sensitive rubber MPC pads. 16MB of memory comes standard and can be expanded up to 128MB. When connected to a Mac or PC via USB, you can drag and drop data between the computer and your MPC500's CF card, just like a hard drive. Because MPC500 is compatible with other MPCs, MPC500 is the perfect way to extend your studio into your mobile lifestyle.
KEY FEATURES
- Battery powered (6 AAs) or wall powered (AC adapter included)
- Pattern-based 48-track sequencer with 16 MIDI channels
- 32-voice drum/phrase sampler with up to 128MB RAM
- Velocity and pressure-sensitive pads for responsive, accurate programming
- 12-level function places one sound on all pads with progressive level or tuning per pad
- Compact Flash drive and USB port (Mass Storage Class)
- Support for standard WAV files and MIDI sequences
- Analog I/O, headphone output, MIDI I/O
- Sounds included to get started quickly
- Four-way sample layering and velocity switching per pad
- Low-pass filter with resonance per voice
- On-board effects: two stereo effects and a master effect
Storage
Compact Flash: Type-II
support up to 2GB card
Memory
16MB installed
Can be expanded to 128MB with EXM-128
Analog Input/Output
(2) Balanced 1/4" Inputs
(2) Balanced 1/4" Outputs
(1) Headphone Output
MID Input/Output
(1) MIDI Input [5-pin DIN]
(1) MIDI Output [5-pin DIN]
Other Input/Output
(1) USB [Storage Support]
Levels
Analog Input = +10dBu
Analog Output = +5dBu
Sampler Resolution
16bit/44.1kHz
Sampler Recording Time
136sec [16MB/MONO]
24min 28sec [128MB/MONO]
Sequencer Details
100,000 notes resolving at 96ppq
99 Sequences with total 48 tracks per seq
20 Songs with total 250 steps per song
24 "Active (loaded)" Programs max
Pad Details
12 (velocity and pressure sensitive)
4 Pad Banks [A, B, C, D]
Synchronization
MIDI Clock only
Power Options
12V DC 500mA pin-negative power adapter (included)
(6) AA batteries [lasts about 4.5hrs continuous use w/backlight ON]
Dimensions
10.47" x 1.73" x 6.89"
266mm x 175mm x 44mm
Weight (net)
2.93 lbs / 1.34 kg
Data Compatibility
MPC1000: SEQ, WAV, PGM
MPC2000/2000XL: SEQ (saved as MID file only), WAV, SND, PGM (Most parameters of PGM file can be loaded.)
MPC2500: SEQ, WAV, PGM
MPC4000: SEQ (saved as MID file only), WAV, AKP (DRUM program only...No Keygroups. Only note assign and tune are loaded.)
MPC3000: SND (THRU Computer)
Z4/Z8: WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
S5000/6000: WAV only (THRU Computer)
S1000/3000: No compatibility
Вообщем настал тот день когда вечером было скучно но занять себя чем-то нужно: вскроем и наведем порядок:
Большие 12x12x5 mm меняем без раздумий:
На второй платке видны микротрещины по пайке силовых ног на регуляторах уровня громкости и записи:
На рейдер одеваем новую зауженную рубашку / юбку / пыльник:
К защитному покрытию экрана очень много вопросов: глубокие царапины и ссадины - конечно же полируем! А он реально красив...
К насадкам на кнопки тоже много вопросов: они пористые и шершавые - полировать в стекло и тем самым уйдет желтизна . конечно глянец куда эффектнее будет смотреться :)
Насадке на фейдер тоже досталось по полировке:
Результат полировки:
Красные насадки оставили без полировки - пусть кнопки запись отличается тактильно от остальных не только цветом но и фактурой поверхности:
Комментариев нет:
Отправить комментарий